68 Configuring MCS 5100
Implementation summaryThe following is a summary of the tasks in this section:
•"Add IP address of IP Telephonynode as an Authenticated Server"
(page 68).
•"Configure the SIP Gateway,trunk, and trunk group" (page 69).
•"Configure number qualifiers" (page 72).
•"Configure a route list" (page 75).
•"Configure routes for each dialing plan entry" (page 77).
Implementation detailsAdd IP address of IP Telephony node as an AuthenticatedSer ver
Use Procedure 2 "Adding the IP Address of the IP Telephonynode as an
Authenticated Server" (page 68) to add the IP address of the IP Telephony
node to the Application Server as an Authenticated Server.
Procedure 2
Adding the IP Addressof the IP Telephony node as an Authenticated Server
Step Action
1Access the MCS 5100 Management Console on the MCS Client:
a. Choose MCP from the Start menu.
b. Click Start console.
c. Log in using your username and password.
d. Select Sites.
e. Select Servers.
f. Select Application Server.
g. Select Components.
h. Select the application server.
2Right-click on Authentication (or Authent...).
3Select Modify.
4Enter 12.123.1.123, the IP address of the IP Telephonynode, in
the Authorized Node IP Addressfield.
5Click Add.
6Click Apply.
Nortel Communication Server 1000
Communication Server 1000 to MCS 5100 ConvergedDesktop Type 2 Configuration Guide
NN43001-321 01.05 Standard
Release 5.0 15 February 2008
Copyright© 2005-2008, Nor tel Networks
.