84 Configuring MCS 5100
This is the HLOC + DN of the convergedtelephone. This number
is used for Click-to-Call in ConvergedMode, and must be a UDP
number.
b. Enter 6139625573 in the Public Charge ID text box.
This is the NPA+ NXX + DN of the converged telephone. It is the
caller identification information sent on a public call. This value is
required, and may be need even in UnconvergedMode.
c. Select cdCOS from the Class of Service drop-down list.
This is the same Class of Service configured in Procedure 5
"Configuring a route list" (page 75).
Note: Youdo not have to configure an alias, but if you do,
ensure that it does not conflict with the alias properties
configured in Step 3.
d. Click Save.
3Set up the converged properties, as follows:
a. Click Converged Desktop properties.
The Converged Desktop Data web page opens, as shown in
Figure 35 "Provisioning Client: Converged Desktop Data" (page
84).
Figure 35
Provisioning Client: Converged Desktop Data
b. Enter 000023345573 in the Converged Desktop Alias text box.
This is the PNI + HLOC + DN of the converged telephone.
c. Enter one of the following values in the Converged Desktop
Preferred Audio Device text box:
If you are configuring UDP,enter the Access Code (AC1 or
AC2) + HLOC + DN of the convergedtelephone.
Nortel Communication Server 1000
Communication Server 1000 to MCS 5100 ConvergedDesktop Type 2 Configuration Guide
NN43001-321 01.05 Standard
Release 5.0 15 February 2008
Copyright© 2005-2008, Nor tel Networks
.