Page348 of 544 M5317BRI Terminal
553-3011-100 Standard14.00 January 2002
Configuration modeThis feature is intended for installers and sophisticated users and is
interlocked with power-on and a special key sequence. Some menus are:
•TEI assignment voice, circuit-switched data, and packet-switched X.25
data (no default, but retained if power lost). X.25 TEI can only be static;
the others must be dynamic.
•Service Identifier Profile (SPID) assignment for voice and circuit-
switched data, not required for packet-switching. (no default, but
retained if power is lost.)
•DN assignment for circuit-switched and packet-switched data
•Test: analog and digital
•Selection of Codec coding law
•Selection of voice and circuit-switched data signaling protocol
Setup modeSetup mode is intended for use by all M5317T digital telephone users. In NI-
1 and Meridian 1 mode, press Setup to display the Setup menu. In MFT mode,
press the center of the volume key to access Setup. The Setup menu includes:
•alerting tone style and cadence (NI-1 and Meridian 1 mode only)
•default volume for handset/headset, alerting tones, and speakerphone
(NI-1 and Meridian 1 mode only)
•query features enabled and DNs (NI-1 and Meridian 1 mode only)
•Service Profile Management (SPM). Enter the four-digit password
“5317” to display an SPM softkey.
•various data options (baud rate, parity, etc.)
•protocol version
•contrast adjustment
•language