49
9.Voice interface resource manager log messages - 0220
0000/0000 | Message: Error encountered attempting to load DTMF patterns. The symbol |
| [symbol] is referenced in the table [table_name] but not found in the table |
| [table_name]. |
| Description: Applications can not access the VIs because of a reference |
| error in an SDM table. This table can not be accessed by the user. |
| Action: Contact NT to correct the problem. |
0000/0001 | Message: Error encountered attempting to load DTMF patterns. |
| Description: Applications can not access the VIs because of a reference |
| error in an SDM table. This table can not be accessed by the user. |
| Action: Contact NT to correct the problem. |
0000/0002 | Message: VIRM has been unable to load DTMF patterns. The specific |
| problem encountered is described in another log. |
Major | Description: The Voice Interface Resource Manager could not load an SDM |
| table. Either the previous, but usually the log immediately following this one, |
| identifies the specific problem. |
| Action: The problem identified in the qualifying log must be corrected. |
| When corrected, the VIRM must be reload. The alarm clears once this is done. |
0000/0003 | Message: Any outstanding alarms generated by the VIRM have been cleared. |
| Description: This log is generated every time the VIRM PRU is brought into |
| service. There may not be any outstanding alarms when the VIRM is brought |
| into service. |
Action: No action.
