59

13.Application call processing engine log messages - 9442

0000/0000 Message: <PRU_name>, has just become operational. Call processing capacity of this ACPE is now 24 out of 24 calls. All pending minor alarms against this ACPE PRU will be cleared. [Two 80 character lines of optional data.]

Description: This log is generated each time the ACPE is rebooted. If there were alarms pending against the PRU they are cleared.

Action: No action.

0000/0001 Message:<PRU_name>, Initialization sequence aborted. Error or inconsistency encountered while loading ACPE initialization data. [Two 80 character lines of optional data.]

Description: An error or inconsistency was found in ACPE datafill. The additional information is provided for NT, not operating company personnel.

Action: Contact NT immediately.

0000/0002 Message: <PRU_name>, Initialization error occurred; ACPE PRU initialization

sequence aborted. [Two 80 character lines of optional data.]

Description: An error occurred while initializing the ACPE PRU. The additional information is provided for NT, not operating company personnel.

Action: Contact NT immediately.

0000/0100 Message: <PRU_name>, encountered a call error. Automatic recovery will be initiated. Other calls being processed by this ACPE should not be affected. [Two 80 character lines of optional data.]

Description: The error has only affected a single subscriber call. The ACPE should recover itself. If this log is generated many times in a short period of time, the ACPE has encountered a serious error and can not recover automatically.

Action: No action is required if this event occurs periodically. If this log occurs often over a short period of time, take the ACPE PRU out of service, and then return it to service.

0000/0102 Message: <PRU_name>, has noted a call event. Calls in progress and new calls should not be affected. [Two 80 character lines of optional data.]

Description: The ACPE is simply reporting an anomaly.

Action: No action.

0000/0103 Message: <PRU_name>. Automatic recovery of a failed call has been initiated. The call will be aborted/rejected as appropriate. [Two 80 character lines of optional data.]

TOPS VSN Log and alarm messages

Page 65
Image 65
Nortel Networks VSN04 manual Application call processing engine log messages