53
TOPS VSN Log and alarm messages
11. ACPE resource manager logmessages - 94400000/0000
Message:
[PRU_name] has detected the termination of an ACPE identified
as [dead_PRU_name] [dead_PRU_number]. [Number_of_calls] will be
terminated.
Description:
An ACPE PRU has died. All calls the ACPE was processing at
the time the PRU died, are lost. If the ACPE died because of a fault, an alarm is
sounded. If the ACPE died because it was courtesied down, then no alarm is
generated.
Action:
Verify in SAS that the ACPEs go into service.
0000/0001
Message:
[PRU_name] has detected the activation of an ACPE identified as
[act._PRU_name] [act._PRU_number].
Description:
An ACPE PRU has been brought into service.
Action:
No action.
0000/0002
Message:
Invalid call reference returned from the ACPE. Call returned: Tag =
[sent (ACPE-RM)_id_number], CallID = [returned_id_number], DMSref =
[DMS_CLLI], DMSID = [DMS_id], Voice Channel = [voice_channel_id].
Description:
The ACPE-RM made a request to the ACPE. When a
response was made by the ACPE, the identifying parameters did not match
those sent. The ACPE-RM ignored the response from the ACPE.
Action:
No action.
0000/0003
Message:
An illegal state transition occurred. Call affected was: Tag = [sent
(ACPE-RM)_id_number], CallID = [returned_id_number], DMSref =
[DMS_CLLI], DMSID = [DMS_id], Voice Channel = [voice_channel_id], Current
State = [current_call_state], Next State = [next_call_state].
Description:
This error should never occur.
Action:
No action.
0000/000A
Message:
SET entry invoked - Aborting a call. Call aborted is: CallID =
[returned_id_number], DMSref = [DMS_CLLI], DMSID = [DMS_id], Voice
Channel = [voice_channel_id].
Description:
The call has been manually aborted.
Action:
No action.
0000/000B
Message:
SET entry invoked - Making an ACPE inactive. The ACPE made
inactive was: [PRU_name] [PRU_number]. New load is: [load_id].
Description:
The ACPE PRU has been made inactive manually.