65
14.T1 resource manager log messages - 9443
0000/0000 Message: [PRU_name] reports internal software error. [Two 80 character lines of optional data.]
Description: The identified PRU is reporting a fatal internal error. The
reason for the error may one of many (too many to list) but is clearly identified in the body of the message.
Action: Document the error and message precisely, and then contact NT.
The PRU must be reloaded.
0000/0001 Message: [PRU_name] reports administration error. Error = [string]. [Two 80 character lines of optional data].
Description: The identified PRU is reporting an administration error. The
reason for the error is one of the following: 1) Operation successful, 2) Bad parameter used, 3) Object versions do not match, 4) Object already exists, 5) Object not marked, 6) Object marked by another session, 7) Object marked by user profile editor, 8) File contains maximum number of objects, 9) Failed to apply an update session, 10) Object name not found,
Action: Make sure that T1 SRU configuration data is initialized.
Configuration data is accessed from Digital Trunk Link under SAS configuration. (When attempting to save configuration data from T1 Maintenance the Digital Trunk Link configuration agent must not be active.)
0000/0002 Message: [PRU_name] reports software error for T1 SRU in Cabinet [ID_number], Slot [Id_number]. [Two 80 character lines of optional data.]
Description: The identified PRU is reporting a software error in the T1 SRU.
The reason for the error is one of the following: 1) Failed to locate configuration data for T1 SRU, 2) Failed to locate trunk mapping data for T1 SRU, 3) Fatal error detected in the T1 audit task. Task exiting, 4) Fatal error in call processing task. Task exiting, 5) Call Processing task for T1 SRU has exited. Task restarting, 6) Call processing task for T1 SRU has exited. Task cannot be restarted, 7) Audit task for T1 SRU has exited. Task restarting, 8) Audit task for T1 SRU has exited. Task cannot be restarted, 9) Failure in trunk status query to T1 SRU, 10) Failure in trunk timeslot query to T1 SRU.
Action: Make sure that T1 configuration data has been initialized. Record all information and report it to NT,
0000/0003 Message: [PRU_name] reports a T1 maintenance error. [Two eighty character lines of system generated information.]
