66 T1 Resource Manager Log Messages (9443)
Description: A T1 Maintenance error has been reported.
Action: Exit, then
0001/0000 Message: T1 Link Error for T1 SRU in Cabinet [cabinet_id], Slot [slot_id]. Condition = [string]. Error Level = [string].
Description: There is a link error for the T1 SRU at the specified location.
The reason (condition) for the error is one of the following: 1) Bipolar violation,
2)Frame slip, 3) Frame loss, 4) Frequency converter unlock, 5) VBus collision,
6)Line fail, 7) Transmit clock fail, 8) 5ms clock, 9) Peripheral loopback, 10) Yellow alarm, 11) Red alarm, 12) A/B buffer overrun.
The error level is one of the following: 1) Error Cleared, 2) Maintenance Limit Attained, 3)
Action: Adjust thresholds using digitial trunk link configuration service. Make sure that the synchronization manager is operational, and that the T1 link is connected properly.
0001/0001 Message: T1 Link Event for T1 SRU in Cabinet [cabinet_id], Slot [slot_id]. Event = [string].
Description: There is a link event for the T1 SRU at the specified location.
The event is either of the following: 1) Channels reconnected for T1 link, or 2) Channels disconnected for T1 link. When the channels have been disconnected all voice channels have been taken out of service. When the channels have been reconnected, the number of voice channels specified by the maintenance limit are available for use.
Action: Refer to previous log for direction.
0002/0000 Message: Voice Link Event for T1 SRU. Event = Link placed in Standby BusiedOut\Standby Inservice\\state.
Global Event Description: One of the T1 links has experienced a change in state. If a link is placed “StandBy BusiedOut” or “Standby InService”, the state change is normal and has been made either by program control or as requested through T1 Maintenance.
Action: First RTP is an integer (decimal) indicating the cabinet number of the T1. Next RTP is an integer (decimal) indicating the slot number of the T1. Next number is an integer (selector) specifying the event.
0002/0001 Message: Voice Trunk Event for T1 SRU in Cabinet [cabinet_id], Slot [slot_id]. Channel = [channel#_id]. Event = [string]. DMS CLLI = [DMS_id], Trunk ID = [trunk_id].
Description: One of the following voice trunk events occurred for the T1
SRU at the specified location: 1) Trunk placed in remote answer state, 2) Trunk placed in remote seized state, 3) Trunk placed in seize failure state, 4) Trunk placed in trunk failure state, 5) Channel allocation failure. Trunk not found in T1 configuration, 6) Channel allocation failure. Trunk not available (not inservice), 7) Call aborted on trunk due to T1 failure or T1 maintenance action,
Action: If trunk state is remote answer or remote seized, clear condition by making the
