1 Setup
Connect to the Computer
You’ll need an
1.Turn off the computer.
2.Turn off the printer (press and hold the Power/Reset button for approximately 2 to 5 seconds).
3.Plug the parallel interface cable into the printer and secure it with the wire clips.
4.Connect the other end of the cable to the parallel port on the computer, and turn on the printer, then the computer.
Connect to Power
1. Insert power cord.
2. Connect to a grounded power outlet.
As a general safety precaution, do not use an extension cord!
The lights on the control panel may flash once then turn off.
4
