|
|
| Troubleshooting | 5 |
|
|
|
| |
|
|
| ||
Problem | Possible Meaning(s) | Solution(s) | ||
|
|
| ||
Data is sent, but not printed. | Printer is not set for local port. | Check the port setting (usually lpt1) for your printer to be | ||
|
|
| sure that it is not being directed either to a remote printer or | |
|
|
| to print to file. (See the Details tab of the OKI OKIJET | |
|
|
| 2500 printer setup dialog box.) | |
| Interface cable is not connected properly. | Press and release the Power on/Reset button to make the |
|
| printer stop its operation. Then properly reconnect the |
|
| interface cable to the printer and host computer. |
|
|
|
| Interface cable is damaged. | Check the interface cable and replace if damaged. |
|
|
|
| The type of interface is incorrect. | Verify that the computer is using the parallel interface. |
|
| Check your software manual to make sure that your |
|
| software communicates to the interface port to which your |
|
| printer is connected. |
|
|
|
| Interface cable is incorrect. | You must use an IEEE |
|
| |
|
|
|
Data is sent, but not printed and the | Printer has paused. | Press and release the Resume/FF button to continue |
Error LED is blinking. |
| printing. |
41
