System configuration menu
The default settings are bold.
Item | Value | Description |
POWER SAVE | 5 min; 15 min; 30 min; | Sets the time before printer enters |
DELAY TIME | 60 min; 240 min | power save mode. |
|
|
|
PERSONALITY | Auto emulation; | Selects the printer emulation |
| PCL; IBM PPR III XL; | language. Note: the only printer |
| Epson FX; | languages that can be selected are |
| AdobePostScrip | those enabled in the Personality |
|
| section of the Maintenance menu. |
USB | ASCII | Specifies PostScript (PS) |
RAW | communication protocol mode of | |
|
| data from USB. (In RAW mode, |
|
|
NETWORK
PS PROTOCOL
CLEARABLE WARNING
AUTO
CONTINUE
MANUAL
TIMEOUT
WAIT TIMEOUT
ASCII | Specifies PS communication |
RAW | protocol mode of data from OkiLAN |
| 6200e Plus. |
| (In RAW mode, |
ON; Job | PCL emulation: Sets the time |
| before deleting error messages. If |
| On, press Error Delete switch to |
| display error. If Job, error remains |
| displayed until next print job is |
| received. |
| PS emulation: Error messages are |
| only shown during job regardless of |
| setting. |
On; Off | Sets the printer to recover |
| automatically after a memory |
| overflow or print overrun. |
60 sec; 30 sec; Off | Sets the time between requesting |
| that paper is inserted and when the |
| print job is cancelled should paper |
| not be inserted. |
| Only works in PostScript mode. |
Off; 5 sec to 300 sec; | Sets the time between receiving the |
default = 40 sec | last byte of data and the page being |
| automatically ejected. |
| Only works in PCL mode. |
| In PS mode the job will be |
| cancelled. |
