Parallel menu, USB menu, Narrow Medium, Wide

Item

PARALLEL

BI-DIRECTION

ECP

ACK WIDTH

ACK/BUSY

TIMING

I-PRIME

OFFLINE

RECEIVE

Parallel menu

The defaults are bold.

Value	Description
Enable; Disable	Selects parallel (Centronics) interface.
Enable; Disable	Selects bi-directional communication.
Enable; Disable	Selects ECP mode.
NARROW; MEDIUM;	Sets ACK width for compatible
WIDE)	reception:
	Narrow = 0.5 µS
	Medium = 1.0 µS
	Wide = 3.0 µS
ACK-in-Busy;	Sets output order for ACK and BUSY
ACK-while-Busy	during reception.
	ACK IN BUSY: BUSY=LOW to the
	end of the ACK pulse
	ACK WHILE BUSY: BUSY=LOW to
	the centre of the ACK pulse.
3 micro-sec; 50 micro- Sets or disables the i-Prime signal
sec; Disable
Enable; Disable	When set to Enable, this function
	maintains reception without changing
	the interface signal, even though an
	alarm occurs.

The interface stays open even if the ON LINE button is pressed.

The interface issues a BUSY signal only when the receive buffer is full or when a service call occurs.

Item

The default settings are bold.

Value	Description
Enable; Disable	Selects USB interface.
Enable; Disable	Selects use of soft reset command.
Enable; Disable	When set to Enable, this function
	maintains reception without
	changing the interface signal, even if
	an alarm occurs. The interface stays
	open even if the ON LINE button is
	pressed. The interface issues a
	BUSY signal only when the receive
	buffer is full or when a service call
	occurs.