b. Select which Binding you prefer. Normally, the first option is the default.
NOTES
•Duplex printing can only be carried out on standard paper sizes and paper weights between 20 and 28 lb. (75 and 105 g/m²).
•The optional duplex unit must be installed in the printer and enabled before duplex printing can be carried out.
•Paper must be loaded into the paper tray with the print side facing upwards. The multi purpose tray cannot be used for duplex printing.
Collating
Collating can be carried out with or without a hard disk drive installed. However, fitting a HDD will achieve greater performance.
If the software application being used has a collate print option, it is recommended to use only one collate option to prevent any conflicts in printing, i.e. collate from the software application or collate from the printer driver.
The following instructions explain how to select collating using a printer driver.
1.Open your printer driver (by choosing File — Print from an application) and select your desired OKI printer.
