Manuals / Omega / Computer Equipment / Scanner

Omega WI8XX-U manual Appendix BIP Address

Models: WI8XX-U

1 92

Download 92 pages 14.59 Kb

Page 85

Appendix BIP Address

An IP address is a unique 32-bit address assigned to a computer and includes:

•A network ID number identifying a network.

•A host ID number identifying a computer on the network.

All IP addresses have been divided into three smaller groups (classes) A, B and C

•Class A addresses have 8-bits of network ID and 24-bits of host ID. They can support a large number of hosts, approximately 2 = 16,777,216 computers per network.

The IP addresses range in binary from 00000001.xxxxxxxx.xxxxxxxx.xxxxxxxx to 01111111.xxxxxxxx.xxxxxxxx.xxxxxxxx

The IP addresses range in decimal from 1.x.x.x to 127.x.x.x Class A network ID’s support a very large number of hosts.

•Class B addresses have 16-bits of network ID and 16-bits of host ID. They can support approximately 216 = 65,536 computers per network.

The IP addresses range in binary from 10000000 00000000.xxxxxxxx.xxxxxxxx to 10111111 11111111.xxxxxxxx.xxxxxxxx

The IP addresses range in decimal from 128.0.x.x TO 191.255.xxx.xxx Class B network ID’s support a medium number of hosts.

•Class C addresses have 24-bits of network ID and 8-bits of host ID. They can support approximately 28 = 256 computers per network.

The IP addresses range in binary from 11000000.00000000.00000000.xxxxxxxx to 11011111.11111111.11111111.xxxxxxxx

The IP addresses range in decimal from 192.0.0.xxx to 223.255.255.xxx Class C network ID’s support a small number of hosts.

The rest of the addresses are divided into two classes, D and E.

Class D networks are not assigned to the host. They are used for multicasting. The address range from 224.x.x.x to 239.x.x.x

Class E networks are experimental or reserved addresses. The address range from 240.x.x.x to 247.x.x.x

79

Image 85

Omega WI8XX-U manual Appendix BIP Address

Contents

CHART http//192.168.1.200 Wireless Meter ScannerUser’sGuide Shop on line atPage Part 1 Introduction TABLE OF CONTENTSPart 2 Hardware LIST OF FIGURES Figure 2.8a Figure 2.8b LIST OF TABLES PART INTRODUCTION 1.1 Safety Considerations1.3 Description 1.2 Before You BeginCustomer Service Inspecting Your Shipment1.3 Description continued Control System on the Ethernet Network Figure 1.1 Temperature Wireless Monitor and1.3 Description continued programs offered by NEWPORT, OMEGA, Wonderware, iConics, IntellutionUpper Display Temperature Values Lower Display Wireless Transmitter ID# 01 thru2.1 Physical Characteristics and Mounting 2.1.1 Front Panel PART HARDWARETable 2.2 Rear Panel Connector Figure 2.2 Rear Panel Power and Output Connections2.1.2 Rear Panel ETHERNETFigure 2.3 Mounting Dimensions 2.1.3 Dimensions1.890 48.00 3.780Thumbnuts 2.1.4 Assembly and Mounting 2.1.4.1 Panel Mounting InstructionSleeve Panel CaseFigure 2.5 Antenna Mounting 2.1.4.2 Antenna Mounting InstructionFigure 2.6 Accessing the Main Board Assembly 2.1.4.3 Disassembly InstructionGasket 2.1.5 Electrical Installation 2.1.5.1 Power Connections Outputs Wiring Hookup 2.1.5.2 Wiring Outputsb Pulse and Analog a Mechanical Relay and SSRTypical Applications 2.1.5.2 Wiring Outputs continuedFigure 2.10 Location of S1 Jumper 2.1.5.3 Jumper Settings for Display Color SetupFigure 2.11 Location of DIP Switches 2.1.5.4 Dip Switches8 Position 4 PositionFigure 2.13 10Base-T Crossover Cable Wiring 2.2.2 10Base-T Crossover Wiring2.2 Network Communication Interfaces 2.2.1 10Base-T RJ-45 Pinout3.1 Ethernet MAC Address PART NETWORK CONFIGURATION3.2 Network Protocols Figure 3.1 Label Detail 3.3 DHCP3.3 DHCP continued Figure 3.2 4 Position DIP Switch3.4 DNS 3.5 IP Address 3.5.1 Default IP AddressFigure 3.3 Network Connections 3.5.2 Changing TCP/IP Properties on Your ComputerFigure 3.4 Network Connections PART NETWORK OPERATIONS 4.0 Testing the ConnectionFigure 4.1 Pinging the Meter from MS-DOS Prompt 4.1 iConnect Software Figure 4.2 Assigning an IP Address using iConnectFigure 4.3 Accessing the Wireless System for Configuration WIRELESS SENSOR HOME PAGE4.1 iConnect Software continued 4.2 Setting a New IP Address over the Network ACCESS CONTROLFigure 4.4 Access Control Figure 4.5 Wireless System Home Page Menu 4.3 Meter’s Configurations and OperationsUsing a web browser, you should be able to view the Meter’s homepage 4.3.1 Power Up Meter 4.3 Meter’s Configurations and Operations continuedLOGIN ADMINISTRATOR4.3.2 Get Readings from the End Device wiSeriesFigure 4.7 Readings Sequence Sequence number Figure 4.9 Java 1.5.x.x. Screen Shots 4.3.3 Java Runtime Environment SetupFigure 4.10 Java 1.4.2.x Screen Shot 4.3.3.2 Java Runtime Environment 1.4 Setup InstructionsAccessing Meter units within your internal network 4.3.3.3 Browser Proxy SelectionAccessing Meter units using the internet DiagnosticsJava Policy 4.3.4Figure 4.11 Java Policy grant codeBase http//192.168.1.200Djava.security.policy=C\0JAVAPOLICY\javapolicy.txt 4.3.4 Java Policy continuedFigure 4.12 Java Policy Figure 4.13 Chart 4.3.5 ChartwiSeries 4.3.5 Chart continued 4.3.6 Controller Setup CONTROLLER SETUPFigure 4.14 Controller Setup A Setup 4.3.6 Controller Setup continuedC Transmission Power B MonitorSETUP SETUPUpdate Cancel Main Menu 4.3.7 Setup4.3.7.2 Setpoints & On/Off Control Auto Setpoint Deviation Setpoints & On/Off ControlSetpoint On/Off4.3.7.3 Alarms 1 Alarm 1 Relay AlarmAlarm 1 Low Alarm 1 HighRetransmission Voltage/Current Input Low Output Low Input High Analog Output RetransmissionOutput High 4.3.7.4 Analog Output RetransmissionScreen Update seconds SETUPAlarm DisplayFigure 4.19b Display Menu if Analog Output Option 4.3.7.5 Display continuedSETUP Screen Update seconds2.CLR 4.3.7.5.1 Display Color ExamplesAmber 4.3.7.5.1 Display Color Examples continuedSetpoint ID Full ID ID Passcode ID4.3.7.6 Passcode ID Figure 4.20 ID Code4.3.8 Network Setup NETWORK SETUPRemote Access Tunneling Figure 4.21 Network SetupC Remote Access 4.3.8 Network Setup continuedA General B Terminal Server4.3.9 End Device Setup END DEVICE SETUPFigure 4.22 End Device Setup 4.3.9.1 End Device Parameters 4.3.9 End Device Setup continuedEnd Device END DEVICE PARAMETERS4.3.9.1 End Device Parameters continued Figure 4.23 End Device ParametersSensor 4.3.9.1 End Device Parameters continuedT75F T74F 4.3.10 Access Control ACCESS CONTROLFigure 4.25 Access Control 4.3.9.1 End Device Parameters continued4.3.10 Access Control continued Table 4.1 List of ASCII / Telnet Commands 01 indicates End Device #1 4.4 Telnet SetupCommand Description4.5 HTTPget Program 4.5.1 HTTPget using Port4.5.2 HTTPget and ARP to Setup Device IP Address Table 4.2 Connector/Transmitter TypesFigure 4.26 HTTPget Example of Polling End Device #2,6,7 4.6 ARP Protocol Figure 4.27 ARP Commands and Responsesarp - s plus IP address plus Physical address Use this command to Figure 4.28 iLog Software Logging Data for End Device #2, 6 4.7 iLog SoftwareTable 4.3 iLog Excel Applications iLog Software continuedzSeries Receiver and Remotes wiSeries with zED RemotesDev1 alarm Dev2 alarm Dev1 alarm Dev1 alarm Dev2 alarm Dev1 alarm File Monitor Mail View Help Status Indicators Data Email ErrorDev1 alarm 4.8.1 InstallationEmail Address Setup Figure 4.30 Mail Notifier Profile SetupEmail Setup Table 4.4 Mail Notifier Commands 4.8.3 Device Setting and ConfigurationReading Command Actual Command4.8.3 Device Setting and Configuration continued Alarm EditorCancel Figure 4.31 Mail Notifier Device Setting5.1 General Deployment Guidelines Part ENVIRONMENT / OPERATING CONDITIONSFigure 5.1 Operation in Buildings Figure 5.2 Fresnel Zone 5.2 With Line-of-SightDistance feet Figure 5.3 Materials in Buildings 5.3 Without Line-of-Sight5.4 Casing and Closure Around the Antenna Material TypePART SPECIFICATIONSALARM 1 & 2 PROGRAMMABLE ON/OFF CONTROL OUTPUT 1INTERFACE SPECIFICATIONS Units can be powered safely with 24 Vac powerWIRELESS COMMUNICATION GENERALRadio Power Output WIRELESS COMMUNICATION continuedSAFETY & REGULATORY COMPLIANCE Table 7.1 Factory Preset Values PART FACTORY PRESET VALUESTable 7.1 Factory Preset Values continued Table 7.1 Factory Preset Values continued End Char Display Alarm Update Network Units Remote FormatName APPENDIX AGLOSSARY Appendix BIP Address Appendix CIP Netmask 81 n Block Crtl AIn order to comply with FCC radio frequencies RF exposure limits, dipole antennas Appendix F Warnings and Regulatory Information continued MAXIMUM POWER LEVELS AND ANTENNA GAINSThe following are user restrictions U.S.A Regulatory 4WRETURN REQUESTS/INQUIRIES WARRANTY/DISCLAIMERTRADEMARK NOTICE omega.comShop on line at omega.com OMEGA…Of Course