Manuals / Omega / Computer Equipment / Scanner

Omega WI8XX-U Appendix F Warnings and Regulatory Information continued, U.S.A Regulatory 4W, Dsss

Models: WI8XX-U

1 92

Download 92 pages 14.59 Kb

Page 90

Appendix F Warnings and Regulatory Information (continued)

Appendix F Warnings and Regulatory Information (continued)

The following alert sign indicates that there are restrictions on usage of the equipment in regards to power limitations on Equivalent Isotropic Radiated Power (EIRP) levels in the European Community.

The following are user restrictions:

• Wideband Data Transmission Systems on the band 2400 – 2483.5 MHz in Europe is limited to a Maximum of 10 mW (10 dBm) for Direct Sequence Spread Spectrum (DSSS). See Annex 3 of ERC/REC 70-03, decision ERC/DEC/ (01)07.

• Combinations of power levels and antennas resulting in a radiated power level above 10 mW - EIRP for Direct Sequence Spectrum (DSSS) devices are considered as not compliant, and are not allowed for use within the European Community and other countries that have adopted the European R&TTE directive 1995/5/EC or the CEPT recommendation ERC/REC 70-03 or both.

• The users in Europe are instructed to change the default 20 dBm level to 10 dBm via the Web Interface of the Meter/Receiver.

	MAXIMUM POWER LEVELS AND ANTENNA GAINS
	U.S.A (Regulatory 4W)		Antenna Gain		Output Max		Maximum Radiated
			Antenna Gain		Output Max		Maximum Radiated
			2.2 dBi		18.0 dBm		20 dBm
	EUROPE (Regulatory 10mW)		2.2 dBi		7.0 - 7.5 dBm		10 dBm
	(DSSS)

The default 20 dBm must be changed to 10 dBm to comply with power level regulations. The 0.5 dBm variation depends on the internal DC power used (3V, 3.3V, 3.7V max) of the different models.

84

Image 90

Omega WI8XX-U manual Appendix F Warnings and Regulatory Information continued, The following are user restrictions, Dsss

Contents

User’sGuide Wireless Meter ScannerCHART http//192.168.1.200 Shop on line atPage TABLE OF CONTENTS Part 1 IntroductionPart 2 Hardware LIST OF FIGURES Figure 2.8a Figure 2.8b LIST OF TABLES 1.1 Safety Considerations PART INTRODUCTIONCustomer Service 1.2 Before You Begin1.3 Description Inspecting Your Shipment1.3 Description continued 1.3 Description continued Figure 1.1 Temperature Wireless Monitor andControl System on the Ethernet Network programs offered by NEWPORT, OMEGA, Wonderware, iConics, Intellution2.1 Physical Characteristics and Mounting 2.1.1 Front Panel Lower Display Wireless Transmitter ID# 01 thruUpper Display Temperature Values PART HARDWARE2.1.2 Rear Panel Figure 2.2 Rear Panel Power and Output ConnectionsTable 2.2 Rear Panel Connector ETHERNET1.890 48.00 2.1.3 DimensionsFigure 2.3 Mounting Dimensions 3.780Sleeve Panel 2.1.4 Assembly and Mounting 2.1.4.1 Panel Mounting InstructionThumbnuts Case2.1.4.2 Antenna Mounting Instruction Figure 2.5 Antenna Mounting2.1.4.3 Disassembly Instruction Figure 2.6 Accessing the Main Board AssemblyGasket 2.1.5 Electrical Installation 2.1.5.1 Power Connections b Pulse and Analog 2.1.5.2 Wiring OutputsOutputs Wiring Hookup a Mechanical Relay and SSR2.1.5.2 Wiring Outputs continued Typical Applications2.1.5.3 Jumper Settings for Display Color Setup Figure 2.10 Location of S1 Jumper8 Position 2.1.5.4 Dip SwitchesFigure 2.11 Location of DIP Switches 4 Position2.2 Network Communication Interfaces 2.2.2 10Base-T Crossover WiringFigure 2.13 10Base-T Crossover Cable Wiring 2.2.1 10Base-T RJ-45 Pinout3.2 Network Protocols Figure 3.1 Label Detail PART NETWORK CONFIGURATION3.1 Ethernet MAC Address 3.3 DHCPFigure 3.2 4 Position DIP Switch 3.3 DHCP continued3.4 DNS 3.5.1 Default IP Address 3.5 IP Address3.5.2 Changing TCP/IP Properties on Your Computer Figure 3.3 Network ConnectionsFigure 3.4 Network Connections 4.0 Testing the Connection PART NETWORK OPERATIONSFigure 4.1 Pinging the Meter from MS-DOS Prompt Figure 4.2 Assigning an IP Address using iConnect 4.1 iConnect SoftwareWIRELESS SENSOR HOME PAGE Figure 4.3 Accessing the Wireless System for Configuration4.1 iConnect Software continued ACCESS CONTROL 4.2 Setting a New IP Address over the NetworkFigure 4.4 Access Control 4.3 Meter’s Configurations and Operations Figure 4.5 Wireless System Home Page MenuUsing a web browser, you should be able to view the Meter’s homepage LOGIN 4.3 Meter’s Configurations and Operations continued4.3.1 Power Up Meter ADMINISTRATORwiSeries 4.3.2 Get Readings from the End DeviceFigure 4.7 Readings Sequence Sequence number 4.3.3 Java Runtime Environment Setup Figure 4.9 Java 1.5.x.x. Screen Shots4.3.3.2 Java Runtime Environment 1.4 Setup Instructions Figure 4.10 Java 1.4.2.x Screen ShotAccessing Meter units using the internet 4.3.3.3 Browser Proxy SelectionAccessing Meter units within your internal network DiagnosticsFigure 4.11 Java Policy 4.3.4Java Policy grant codeBase http//192.168.1.2004.3.4 Java Policy continued Djava.security.policy=C\0JAVAPOLICY\javapolicy.txtFigure 4.12 Java Policy 4.3.5 Chart Figure 4.13 ChartwiSeries 4.3.5 Chart continued CONTROLLER SETUP 4.3.6 Controller SetupFigure 4.14 Controller Setup C Transmission Power 4.3.6 Controller Setup continuedA Setup B MonitorUpdate Cancel Main Menu SETUPSETUP 4.3.7 Setup4.3.7.2 Setpoints & On/Off Control Setpoint Setpoints & On/Off ControlAuto Setpoint Deviation On/Off4.3.7.3 Alarms 1 Alarm 1 Low AlarmAlarm 1 Relay Alarm 1 HighOutput High Analog Output RetransmissionRetransmission Voltage/Current Input Low Output Low Input High 4.3.7.4 Analog Output RetransmissionAlarm SETUPScreen Update seconds DisplaySETUP 4.3.7.5 Display continuedFigure 4.19b Display Menu if Analog Output Option Screen Update seconds4.3.7.5.1 Display Color Examples 2.CLR4.3.7.5.1 Display Color Examples continued Amber4.3.7.6 Passcode ID Passcode IDSetpoint ID Full ID ID Figure 4.20 ID CodeRemote Access Tunneling NETWORK SETUP4.3.8 Network Setup Figure 4.21 Network SetupA General 4.3.8 Network Setup continuedC Remote Access B Terminal ServerEND DEVICE SETUP 4.3.9 End Device SetupFigure 4.22 End Device Setup 4.3.9 End Device Setup continued 4.3.9.1 End Device Parameters4.3.9.1 End Device Parameters continued END DEVICE PARAMETERSEnd Device Figure 4.23 End Device Parameters4.3.9.1 End Device Parameters continued SensorT75F T74F Figure 4.25 Access Control ACCESS CONTROL4.3.10 Access Control 4.3.9.1 End Device Parameters continued4.3.10 Access Control continued Command 4.4 Telnet SetupTable 4.1 List of ASCII / Telnet Commands 01 indicates End Device #1 Description4.5.1 HTTPget using Port 4.5 HTTPget ProgramTable 4.2 Connector/Transmitter Types 4.5.2 HTTPget and ARP to Setup Device IP AddressFigure 4.26 HTTPget Example of Polling End Device #2,6,7 Figure 4.27 ARP Commands and Responses 4.6 ARP Protocolarp - s plus IP address plus Physical address Use this command to 4.7 iLog Software Figure 4.28 iLog Software Logging Data for End Device #2, 6zSeries Receiver and Remotes iLog Software continuedTable 4.3 iLog Excel Applications wiSeries with zED RemotesDev1 alarm File Monitor Mail View Help Status Indicators Data Email ErrorDev1 alarm Dev2 alarm Dev1 alarm Dev1 alarm Dev2 alarm Dev1 alarm 4.8.1 InstallationFigure 4.30 Mail Notifier Profile Setup Email Address SetupEmail Setup Reading Command 4.8.3 Device Setting and ConfigurationTable 4.4 Mail Notifier Commands Actual CommandCancel Alarm Editor4.8.3 Device Setting and Configuration continued Figure 4.31 Mail Notifier Device SettingPart ENVIRONMENT / OPERATING CONDITIONS 5.1 General Deployment GuidelinesFigure 5.1 Operation in Buildings 5.2 With Line-of-Sight Figure 5.2 Fresnel ZoneDistance feet 5.4 Casing and Closure Around the Antenna 5.3 Without Line-of-SightFigure 5.3 Materials in Buildings Material TypeALARM 1 & 2 PROGRAMMABLE SPECIFICATIONSPART ON/OFF CONTROL OUTPUT 1WIRELESS COMMUNICATION Units can be powered safely with 24 Vac powerINTERFACE SPECIFICATIONS GENERALWIRELESS COMMUNICATION continued Radio Power OutputSAFETY & REGULATORY COMPLIANCE PART FACTORY PRESET VALUES Table 7.1 Factory Preset ValuesTable 7.1 Factory Preset Values continued Table 7.1 Factory Preset Values continued Update Network Units Remote Format End Char Display AlarmName APPENDIX AGLOSSARY Appendix BIP Address Appendix CIP Netmask 81 n Crtl A BlockIn order to comply with FCC radio frequencies RF exposure limits, dipole antennas The following are user restrictions MAXIMUM POWER LEVELS AND ANTENNA GAINSAppendix F Warnings and Regulatory Information continued U.S.A Regulatory 4WTRADEMARK NOTICE WARRANTY/DISCLAIMERRETURN REQUESTS/INQUIRIES omega.comOMEGA…Of Course Shop on line at omega.com