Controls & connectors

ACD compartment [35]

CDs are loaded here.

BUSB indicator [53, 56]

This indicator lights up when the CR-N1 is successfully recognized by the PC or Mac connected to the USB port.

CACOUSTIC PRESENCE indicator [34]

This indicator lights up when the Acous- tic Presence function is set to either

A. PR 1 or A. PR 2.

DENERGY SAVE indicator [30]

This indicator lights up when the Energy Save function is on.

ESTANDBY/ON button [30]

This button is used to turn on the CR-N1 and select Standby mode.

FSOURCE DIRECT indicator [51]

This indicator lights up when the CD, LINE, USB, FM, and AM sources are selected directly (i.e., when the USB Mix function is off).

GUSB MIX ON indicator [51]

This indicator lights up when the USB Mix function is on.

HUSB MIX button [51]

This button is used to turn on and off the USB Mix function.

IUSB MIX LEVEL control [51]

This control is used to balance the level of the USB signal and the selected source signal when using the USB Mix function.

JENERGY SAVE button [30]

This button is used to turn on and off the Energy Save function.

KMEMORY button [39, 42–45]

This button is used with CD Memory Playback and when presetting radio sta- tions.

LFM MODE button [45]

This button is used to set the FM mode to either Auto or Mono.

MNext/Preview/Tuning button [36–39, 41, 43–45]

When playing CDs, this button is used to select the next track, subsequent tracks, or to preview. It’s also used for tuning the radio.

NDISPLAY button [40, 44–46]

When playing CDs, this button is used to display the remaining track, disc, and program times. It’s also used when nam- ing radio presets.

OPrevious/Review/Tuning button [36–39, 41, 43–45]

When playing CDs, this button is used to select the beginning of the current track, previous tracks, or to review. It’s also used for tuning the radio.

POPEN/CLOSE button [35]

This button is used to open and close the disc compartment.

QPLAY/PAUSE button [35, 36]

This button is used to start and pause CD playback.

RSTOP button [36]

This button is used to stop CD playback.

SRemote control sensor [8]

This sensor receives command signals from the remote controller.

TDisplay [14]

The display shows function settings and other information. The current time is displayed when the CR-N1 is in Standby mode.

UVOLUME UP button [33]

This button is used to increase the vol- ume.

VVOLUME DOWN button [33]

This button is used to decrease the vol- ume.

WACOUSTIC PRESENCE button [34]

This button is used to turn on and off the Acoustic Presence function.

XINPUT selector button [33]

This button is used to select the CD, LINE, USB, FM, and AM input sources.

13