Using the timer (remote controller only)

STANDBY/ON

TIMER ENTER

SETTING ( / )

5If you selected the FM or AM source, use the SETTING (/) buttons to select a preset station.

TIMER

W.DAY

MHz

6Press the STANDBY/ON button to enter Standby mode.

CR-N1 will automatically enter Standby mode after the specified sleep time has elapsed, ignoring the timer’s OFF setting.

The timer still works when the Energy Save function is on.

Turning the timers on & off

The timers can be turned on and off independently as follows.

Note that a timer cannot be turned on unless it has been programmed.

1Press the TIMER button repeatedly to select the WEEKDAY or WEEKEND timer.

At the specified ON time, the CR-N1 will automatically turn on and play the speci- fied source. Make sure that the volume is set at an appropriate level, and if you’ve programmed the timer for CD playback, don’t forget to load a disc. At the speci- fied OFF time, the CR-N1 will automatically turn itself off.

If you configure a day as both a weekday and a weekend day, for example, to turn the CR-N1 on and off twice on that day, leave at least one minute between the first timer’s OFF setting and the second timer’s ON setting. If the second timer’s ON setting occurs before the first timer’s OFF setting, the second timer’s settings will be ignored.

If the sleep timer function is turned on during a timer’s ON–OFF period, the

or

2Use the SETTING (/) buttons to turn the timer on or off, and then press the ENTER button.

TIMER

W.DAY

When the Weekday timer is on, “W.DAY” is displayed, and when the Weekend timer is on, “W.END” is displayed.

48