Turning the CR-N1 on & off
1Press the STANDBY/ON (
) button on the CR-N1 or remote controller.Remote controller
Using Energy Save
The Energy Save function reduces power consumption while the CR-N1 is in Standby mode.
1 In Standby mode, press the ENERGY SAVE button on the CR-N1 (the ENERGY SAVE indicator lights up and the clock display disappears).
The display lights up and the CR-N1 is ready for use.
Press the STANDBY/ON (
) button again to enter Standby mode.
Note: If you turn the CR-N1 on or off, or connect or disconnect the USB cable while your computer is outputting sound (e.g., playing back audio), or while launching audio playback software, your computer may become unstable. Always quit audio playback software before turning the CR-N1 on or off, or before connecting or disconnecting the USB cable.
If the CR-N1 is turned on or off fre- quently, or the USB cable connected or disconnected frequently while your computer is up and running, in some cases your computer may stop operating nor- mally. In this case, you should restart your computer.
2To turn off Energy Save mode, press the ENERGY SAVE button again.The Energy Save function can be turned on or off while the CR-N1 is either on or in Standby mode. When the ENERGY SAVE button is pressed while the CR-N1 is on, although the ENERGY SAVE indicator lights up, Energy Save mode is not engaged until the Standby mode is
selected by pressing the STANDBY/ON (
) button.
Although the clock display is turned off in Energy Save mode, the timer functions still work.
indicator 
