Listening to the radio

FM MODE DISPLAY

Listening to stereo broadcasts

 

Using RDS (European models)

 

 

 

There are two FM radio modes: Auto and Mono. In Auto mode, the CR-N1 automatically switches to Stereo mode if the signal strength of tuned FM station is strong enough. In this case, the STEREO indicator appears. If the signal is not strong enough, stereo reception may be noisy and the STEREO indicator may flash. In this case, you may prefer to listen in Mono mode.

1Use the FM MODE button to select the FM mode: Auto or Mono.

The AUTO indicator appears when Auto mode is selected, and the MONO indica- tor appears when Mono mode is selected.

RDS is only available with European models and in areas where RDS broadcasts are avail- able. The CR-N1 supports RDS Program Service Names (PS). When an FM station that supports RDS Program Service Names (PS) is tuned properly, that station’s name can be displayed in addition to its frequency. In this case, the RDS indicator appears on the dis- play.

1Use the DISPLAY button to toggle the display between the station name and its frequency.

For named presets, the name you speci- fied appears instead of the station name. In areas where the signal strength is weak, the RDS information may not be displayed.

46