Playing CDs

OPEN/CLOSE

PLAY/PAUSECD

PLAY

INPUT

Loading discs

 

Starting playback

 

 

 

The CR-N1 features a vertical disc loading compartment.

1To open the disc compartment, press the OPEN/CLOSE () button on the CR-N1 (the door slides open).

2Mount the CD onto the spindle with the labelled side facing forwards as shown.

Pickup

Make sure that the disc is mounted securely.

Do not touch the pickup lens. Doing so may cause a malfunction.

3To close the disc compartment, press the OPEN/CLOSE ( ) button again.

To unload a disc, press the OPEN/CLOSE

( ) button, wait until the disc compartment door is fully open, and then remove the disc.

1To select the CD input source, press the INPUT button on the CR-N1 repeatedly until “CD” appears on the display, or press the CD button on the remote con- troller (the CD indicator appears).

Remote

controller

C D

2To start CD playback, press thePLAY/PAUSE ( ) button on the

CR-N1, or the PLAY () button on the remote controller (the play indicator appears).

Remote

controller

C D

Playback commences with the first track and stops automatically when all tracks have been played.

If the CR-N1 is in Standby mode and there’s a CD in the disc compartment, the CR-N1 turns on automatically, selects CD as the input source, and starts playback

when the PLAY/PAUSE ( ) button is pressed.

If the input source is changed during CD playback, playback stops.

The Volume, Muting, and Acoustic Presence functions can all be used with CD playback.

35