Onkyo CR-N1 Selecting 12 or 24 hour display, Calling the clock, Use the SETTING, 1Press the CLOCK CALL button

Basic operation

	CLOCK CALL
TIMER	ENTER

SETTING ( / )

Selecting 12 or 24 hour display

The CR-N1 can display time in the 12- or 24-hour format.

1Press the TIMER button repeatedly until “24H/12H” appears on the display, and then press the ENTER button.

The current setting (“24H” or “12H”) flashes on the display.

2Use the SETTING (/) buttons to select either 24H (24 hour clock) or 12H (12 hour clock), and then press the ENTER button.

Calling the clock

The time can be displayed at anytime by using the Clock Call function.

1Press the CLOCK CALL button.

The day and time are displayed. After a few seconds, the day display is replaced by the selected input source (e.g., CD, LI (LINE), FM, AM, or USB).

2To cancel the Clock Call function, press the CLOCK CALL button again.

If the clock has not been set when the CLOCK CALL button is pressed, “ADJUST” appears on the display. In this case, press the CLOCK CALL button again to cancel, and then set the clock as explained on page 31.

The clock format is set.

32