Basic operation

TIMER ENTER SETTING ( / )Numeric keypad

Setting the clock

The remote controller is used to set the clock.

Setting the day & time

1Press the TIMER button repeatedly until “ADJUST” appears on the display, and then press the ENTER button.

Note that the clock must be set to the 24 hour format in order to use the numeric keypad to set the day and time.

3Use the SETTING (/) buttons, or the numeric keypad to set the time, and then press the ENTER button (the clock is now set.).

Remote controller

The day of the week flashes on the dis- play.

2Use the SETTING (/) buttons, or the numeric keypad to select the day of the week, and then press the ENTER button (the time flashes on the display).

Remote controller

Days are selected using the numeric keypad as follows:

1: SUN

2: MON

3: TUE 4: WED

5: THU

6: FRI

7: SAT

The time is entered using the numeric keypad as follows:

To enter 09:38 a.m., press the following buttons: 10/0, 9, 3, 8, and then ENTER.

To enter the time 11:00 a.m., press the following buttons: 1, 1, 10/0, 10/0, and then

ENTER.

If you set the clock while the CR-N1 is in Standby mode, the time is displayed. If you set it while the CR-N1 is on, the previously displayed information reappears.

31