Listening to the radio

AM

FM

INPUT

You must connect the antenna in order to use the radio. See “Connecting an AM antenna” on page 23 and “Connecting an FM antenna” on page 24 for information.

Tuning the radio

1To select either FM or AM, press the INPUT button on the CR-N1 repeatedly until “FM” or “AM” appears on the dis- play, or press the FM or AM button on the remote controller.

Remote controller

3For AM stations: press and hold a Tuning

(/) button for more than half a second to start tuning, then release when the desired frequency is reached. While the frequency value is still flashing on the display, use the Tun-

ing (/) buttons to fine tune the station in small steps. The Tun-

ing () indicator appears when a sta- tion is properly tuned.

kHz

2For FM stations: press and hold a Tuning

( /) button for more than half a second and then release it. The CR-N1 searches for the next station. While the frequency value is still flash- ing on the display, if necessary, use the

Tuning ( /) buttons to fine tune the station in small steps. The

Tuning () indicator appears when a station is properly tuned.

Note that once the frequency value stops

flashing, pressing the Tuning (/

) buttons selects the presets, not the frequency. In order to adjust the fre- quency, you must press and hold the Tun-

ing ( /) buttons for more than half a second.

The Volume, Muting, and Acoustic Presence functions can all be used with the radio.

STEREO

MHz

41