Using remote controller
ON 
STDBY
Controlling an Onkyo DVD player
The 
connector of the Onkyo DVD player must be connected to the
1.Press the DVD MODE button.
The DVD MODE button lights green.
2.Press the desired operation button.
The buttons shaded in the figure to the left are the operation buttons that can be used to control an Onkyo DVD player.
Operation buttons:
ON: Turns the DVD player on and off
STDBY: Turns the DVD player off. (Some sets may not respond to this button. In this case, use the ON button to put the DVD player in the standby state.)
SETUP: Displays the menu 
: Moves the cursor
RETURN
ENTER,
DISC
TOP MENU 
AUDIO 
ANGLE 
DVD MODE
SETUP
VOL 
MENU
MUTING 
SUBTITLE
ENTER: Confirms the selection
RETURN: Return button
TOP MENU or MENU: Displays the menu screen(s) recorded on DVD media.
DISC 
: Selects a disc in the DVD changer.
AUDIO: Press repeatedly to select an audio and/or language track recorded on a
ANGLE: Press repeatedly to select a camera angle when a DVD- Video is recorded with multiple angle playback.
DVD
operation buttons
Numeric keys
SEARCH
SUBTITLE: Press repeatedly to select one of the subtitle languages recorded on a
SEARCH: Press to find the specific section on a disc where you want to start playback.
RANDOM/R: Press to start random playback.
: Chapter/Track down
: Chapter/Track up
: Play
: Stop
: Fast reverse
: Fast forward
: Pause
OPEN/CLOSE 
: Open/close the disc tray
0, 1 to 9, +10: Numeric keys
You may also use the following buttons:
VOL 
: Adjusts the volume at the
MUTING: Activates the muting function at the
Note:
When operating an Onkyo DVD player directly with the remote
controller without connecting the 
terminals,
57
