Recording a source
Input source buttons
STANDBY/ON
STANDBY
POWER
ON
OFF
|
| ZONE 2 (GRN ) |
|
|
|
|
|
|
|
|
|
|
|
| AUDIO | REC ( RED ) | DVD | VIDEO 1 | VIDEO 2 | VIDEO 3 | VIDEO 4 | VIDEO 5 | TAPE | FM | AM | PHONO | C D |
PURE AUDIO UPSAMPLING | SELECTOR |
|
|
|
|
|
|
|
|
|
|
|
|
MASTER VOLUME
DISPLAY
PHONES | REC OUT ZONE 2 | OFF | STEREO SURROUND THX | DSP | DIMMER FM MODE MEMORY SETUP | ENTER | RETURN | VIDEO 5/VIDEO CAM INPUT |
| |
|
|
| ||||||||
ZONE 2 LEVEL |
|
|
|
| CLEAR | TUNING | PRESET | S VIDEO | VIDEO | L AUDIO R |
|
|
|
|
|
|
| DIGITAL | |||
REC OUT
To record the input source signal you are currently watching or listening to
This method outputs to the audio and video outputs the currently selected input source signal. This method allows you to a signal while you are actually listening to or watching it.
1.Select the input source to record by pressing the corresponding input source button.
The input source is now selected and you may watch or listen to it as desired.
2.Press the REC OUT button repeatedly until “Rec Sel:SOURCE” appears in the front display.
The currently selected input source signal to the TAPE OUT, VIDEO 1 OUT, VIDEO 2 OUT outputs for recording.
3.Start recording at the recording component as desired.
To confirm the settings, press the Rec Out button. The current settings will appear for 3 seconds in the front display.
Notes:
•If you change the input source during recording, you will record the signals from the newly selected input source.
•You cannot record the surround effects.
•Digital signals input to the DIGITAL INPUT (COAXIAL) and DIGITAL INPUT (OPTICAL) inputs will be output to the DIGITAL OUTPUT (OPTICAL) output.
•Digital input signals are only output to the digital outputs and analog input signals are only output from the analog outputs. There is no conversion from digital to analog or vice versa. When connecting CD players and other digital components, do not connect only the digital terminals, but the analog ones as well.
•There are some restrictions on recording digital signals. When making digital recordings, consult the instruction manual that came with your digital recording equipment (e.g., MD recorder or DAT deck) to know what restrictions are imposed.
•You cannot record the source connected to the MULTI CHANNEL INPUT connector.
53
