Packard Bell TK13BZ, TK11BZ manual HDD Module Installation

HDD Module Installation

1.Put HDD brackets onto HDD module. (Figure 3-15)

2.Install four (4) screws (C) to secure HDD brackets (D) to HDD module. (Figure 3-15)

3.Put HDD module into component bay. (Figure 3-14)

4.Slide the HDD module towards the mainboard connector (B) to secure it. (Figure 3-14)

5.Install one (1) screw (A) to secure HDD module. (Figure 3-14)

6.Install base door.

ID	Size	Quantity	Screw Type
A	M2.5*8.0	1
C	M3.0*3.0	4

3-20 Machine Maintenance Procedures