Packard Bell TK13BZ, TK11BZ manual Mainboard Installation

11. Disconnect Bluetooth cable from mainboard connector (G). (Figure 3-28)

G

Figure 3-31. Mainboard

Mainboard Installation

1.Connect Bluetooth cable to mainboard connector (G). (Figure 3-31)

2.Put computer with the LCD module flat on the surface. (Figure 3-29)

3.Put a nonabrasive, protective cover over the LCD panel. (Figure 3-29)

4.Connect DC-IN cable to mainboard connector (F). (Figure 3-30)

5.Put mainboard into lower cover. (Figure 3-28)

6.Install and secure four (4) screws (E) to mainboard. (Figure 3-28)

7.Connect LVDS cable (C) to mainboard connector. (Figure 3-28)

8.Connect microphone cable (D) to mainboard connector. (Figure 3-28)

9.Put Bluetooth cable (B) into cable guides. (Figure 3-28)

10.Install USB board.

11.Install ODD board.

12.Install Bluetooth board.

ID	Size	Quantity	Screw Type
E	M2.5*5.0	4

3-34 Machine Maintenance Procedures