Packard Bell TK11BZ manual Wlan Wireless Local Area Network Board Removal, Wlan Board Installation

WLAN (Wireless Local Area Network) Board Removal

Prerequisite:

Base Door Removal

1.Find WLAN board (B) in the component bay. (Figure 3-10)

2.Disconnect main (B) and auxiliary (A) antenna cables from WLAN board. (Figure 3-12)

A

B

C

D

Figure 3-12. WLAN Board

3.Remove one (1) screw (C). (Figure 3-12)

4.Remove WLAN board from mainboard connector (D). (Figure 3-12)

WLAN Board Installation

1.Put WLAN board into mainboard connector (D). (Figure 3-12)

2.Install and secure one (1) screw (D). (Figure 3-12)

3.Install main (B) and auxiliary (A) antenna cables on WLAN board. (Figure 3-12)

4.Install base door.

ID	Size	Quantity	Screw Type
D	M2.5*3.0	1

Machine Maintenance Procedures 3-17