Packard Bell TK13BZ, TK11BZ manual Power Board Removal, Power Board Installation

Power Board Removal

Prerequisite:

Upper Cover Removal

1.Find power board (B) on upper cover. (Figure 3-20)

2.Remove power board FFC (Flat Flex Cable) (A) from upper cover. (Figure 3-22)

3.Remove one (1) screw (B). (Figure 3-22)

B

A

Figure 3-22. Power Board

4. Remove power board from upper cover.

Power Board Installation

1.Install power board (B) on upper cover. (Figure 3-20)

2.Install power board FFC (A) on upper cover. (Figure 3-22)

3.Install and secure one (1) screw (B) to lower cover. (Figure 3-22)

4.Install upper cover.

ID	Size	Quantity	Screw Type
B	M2.5*3.0	1

3-26 Machine Maintenance Procedures