Packard Bell TK13BZ, TK11BZ manual USB Board Removal, Component Location

USB Board Removal

Prerequisite:

Upper Cover Removal

1. Find USB (Universal Serial Bus) board (A) on lower cover. (Figure 3-24)

C

A

B

Figure 3-24. Component Location

2.Remove adhesive tape securing the USB board FFC. (Figure 3-25)

3.Disconnect USB board FFC (A) from module connector (B). (Figure 3-25)

4.Disconnect and remove USB board FFC (A) from mainboard connector (C). (Figure 3-25)

C

A

B

D

Figure 3-25. USB Module

5.Remove screw (D) from lower cover. (Figure 3-25)

6.Remove USB module from lower cover.

3-28 Machine Maintenance Procedures