Packard Bell TK11BZ, TK13BZ manual Touchpad Removal, Touchpad Installation

Touchpad Removal

Prerequisite:

Upper Cover Removal

1.Find touchpad (C) on upper cover. (Figure 3-20)

2.Remove touchpad FFC (A) from touchpad. (Figure 3-23)

3.Disconnect and remove touchpad FFC (A) from touchpad connector (B). (Figure 3-23)

A

D

B

C

Figure 3-23. Touchpad

4.Lift plastic cover (C) securing the grounding tape and remove grounding tape (D) from touchpad. (Figure 3-23)

5.Remove touchpad from upper cover.

Touchpad Installation

1.Install touchpad (C) on upper cover. (Figure 3-20)

2.Lift plastic cover (C) and install grounding tape (D) onto touchpad. (Figure 3-23)

NOTE: NOTE:

Make sure the grounding tape is touching the connective section of the touchpad as shown in Figure 3-23.

3.Connect touchpad FFC (A) to touchpad connector (B). (Figure 3-23)

4.Install touchpad FFC to touchpad. (Figure 3-23)

5.Install upper cover.

Machine Maintenance Procedures 3-27