Setup menu list (continued)

SW MODE screen (continued)

 

 

 

Item

Display

Description of settings

 

 

 

mode

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

USER1

(Camera)

Selects the function assigned to the USER1 button.

 

P2

 

TAPE

 

 

REC CHECK:

 

 

 

 

 

 

Performs Rec Check.

 

 

 

 

 

 

SPOTLIGHT:

 

 

 

 

 

 

Auto iris control for the spotlight ON/OFF

 

 

 

 

 

 

BACKLIGHT:

 

 

 

 

 

 

Auto iris control for the backlight compensation (Page 39)

 

 

 

 

 

 

BLACKFADE:

 

 

 

 

 

 

Blackfade (Page 45)

 

 

 

 

 

 

WHITEFADE:

 

 

 

 

 

 

Whitefade (Page 45)

 

 

 

 

 

 

ATW:

 

 

 

 

 

 

ATW function ON/OFF

 

 

 

 

 

 

ATWLOCK:

 

 

 

 

 

 

Fixes the white balance value when the button is pressed during ATW. Press

 

 

 

 

 

 

again to perform ATW.

 

 

 

 

 

 

GAIN: 18 dB:

 

 

 

 

 

 

Press the button to set the gain value to 18 dB. This setting takes effect with

 

 

 

 

 

 

the 60i and 60P recording formats only. It is not valid when the recording

 

 

 

 

 

 

frame rate is less than 22 fps or when the slow shutter mode (1/15) is

 

 

 

 

 

 

established.

 

 

 

 

 

 

• When the gain value is set to 18 dB or set from 18 dB to another value, the

 

 

 

 

 

 

image can be disordered for a moment.

 

 

 

 

 

 

• If ON is set for the setting menu AUTO SW and you have selected a setting

 

 

 

 

 

 

other than OFF under AGC, auto gain will be provided when auto mode has

 

 

 

 

 

 

been established even if GAIN 18dB has been set.

 

 

 

 

 

 

FOCUS RING:

 

 

 

 

 

 

Selects the focus ring function (FOCUS or IRIS). The FOCUS RING is

 

 

 

 

 

 

functional when the FOCUS switch is in AUTO mode.

 

 

 

 

 

 

INDEX/MEMO:

 

 

 

 

 

 

Text memo recording (P2 card)(Page 48)/Index recording (cassette tape)

 

 

 

 

 

 

(Page 49)

 

 

 

 

 

 

SLOT SEL (P2 card only):

 

 

 

 

 

 

Selects one of the P2 card slots. (Page 48)

 

 

 

 

 

 

SHOT MARK (P2 card only):

 

 

 

 

 

 

Shot mark recording (Page 48)

USER2

(Camera)

Selects the function assigned to the USER2 button.

 

P2

 

TAPE

 

 

The settings are the same as USER1 above.

 

 

 

 

 

 

BACKLIGHT

 

 

 

 

 

 

 

 

 

USER3

(Camera)

Selects the function assigned to the USER3 button.

 

P2

 

TAPE

 

 

The settings are the same as USER1 above.

 

 

 

 

 

 

INDEX/MEMO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

indicates the factory setting.

104