Panasonic AG-HVX200P Setting the time data (continued)

Setting the time data (continued)

5When the screen below appears, set the time code value.

Press the and buttons to select the time code value.

Press the button to move to the next digit, and press the and buttons again to select the value.

You can reset the time code to zero by pressing

COUNTER RESET.

BARS SHUTTER SPEED SEL

RESET

								START/
						DATE/	PHOTO STOP
CH 1 SELECT CH 2 SELECT		INPUT 1		INPUT 2	OSD	TIME	SHOT
INT(L)	INT(R)	ON	ON
INPUT 1	INPUT 2	OFF	OFF		COUNTER	RESET	TITLE	ZOOM
INPUT 2
	AUDIO		MIC POWER +48V		MULTI/		A.DUB	+
			ZEBRA	OIS	P-IN-P REC			VOL
COUNTER	RESET/TC SET
								-
					/REW	PLAY	FF/

Camera or Remote control

6Press the MENU button when you have

finished setting the time code.

MENU

7Press the button to select YES, and press the button.

8Press MENU twice to exit the menus.

Setting user information

Setting user information allows you to store 8-digit information (such as the date and time) in the hexadecimal format on the tape’s sub code track. User information is automatically saved in the memory and retained after you turn off the power.

1Set the POWER switch to ON.

2In the setup menus, RECORDING SETUP screen UB MODE, select USER.

•For menu operation (Page 96)

•You can also use the menu buttons on the

remote control. (Page 15)

Example: In the MCR mode

3Press the and buttons to select UB PRESET, and press the button.

60