6 The screen below is displayed, so set the

10 The following screen appears, select

file name of six letters using , , or

YES, then press button. (To return to

button. Set the same as user information.

the menu level above, press the MENU

(Page 60)

button.)

• Characters that can be set

 

 

 

 

 

 

 

 

 

 

 

 

Space, A to Z, 0 to 9, : ; < = > ? @ [ \ ] ^_-./

 

 

 

 

 

 

If the COUNTER RESET button is pressed

 

 

 

 

 

 

when the filename has been set, the

 

 

 

 

 

 

 

 

 

 

 

 

characters are cleared.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The message below appears, and the changes

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

to the scene file are complete.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7After you finish setting the filename, press the MENU button.

•The name change will not be completed unless you have finished step 10.

8Press button to select SAVE/INIT.

9Press button, and use button to select YES. Press button.

11 Press MENU twice to exit the menus.

•The original scene file settings will be restored when the power is turned off if SAVE has not been selected.

•To return the scene file settings to the factory settings, select INITIAL in step 9, then do steps 10 to 11.

Shooting

55