Panasonic AG-HVX200P manual 79

Video deck (Dubbing)

When a component video cable is used for the connection, only the output signals from the unit will be available.

Audio cable (optional)

White: CH1 (left channel) sound

Red: CH2 (right channel) sound

S-video cable

S-VIDEO(optional)

IN/OUT

CH1

IN/

AUDIO OUT

CH2

IN/COMPONENT

OUT	OUT
VIDEO
Video cable (optional)	Component video
	cable (included)

VCR

Connect one of these cables to the terminal on the video deck.

Connect to the output terminal on the external device when the video signals and audio signals of an external device are to be input to the unit. (Tape mode only)

Connect to the input terminal on the external device when the unit’s video signals and audio signals are to be output to an external device.

•Except when performing audio dubbing on existing recordings, audio signals cannot be recorded unless video signals are input to the SVIDEO IN/OUT connector and/or VIDEO IN/ OUT jack.

•The signals of the S-VIDEO IN/OUT terminal take priority over the signals of the VIDEO IN/ OUT terminal.

TV/Monitor (playback/dubbing)

When a component video cable is used for the connection, only the output signals from the unit will be available.

Editing

	Audio cable (optional)
	White: CH1 (left channel) sound
	Red: CH2 (right channel) sound
		S-video cable
	S-VIDEO	(optional)
CH1	IN/OUT
IN/
AUDIO OUT
CH2	COMPONENT
IN/
OUT	OUT
VIDEO
Video cable		Component video
(optional)		cable (included)

TV/Monitor

Connect one of these cables to the terminal on the television.

•When the COMPONENT OUT connectors and the S-VIDEO OUT or VIDEO OUT connector have been connected concurrently, the COMPONENT OUT connectors take priority. Signals cannot be output through both sets of connectors at the same time.

•When connecting the camera to another device using the component video cable, if the terminal on the device to which it is to be connected is a BNC type, use the pin-BNC conversion plug provided.

79