Computer (non-linear editing/file transfer)

File transfer/nonlinear editing

Computer

USB cable (optional)

 

• For a Windows computer

 

 

 

 

Mini-B type

USB 2.0

 

 

 

4-pin type

1394

1394 cable (optional)

•For an Apple Macintosh computer

•For details on the computer’s conditions and other factors, see page 82.

1394AVC transfer/nonlinear editing

Computer (Windows/Apple Macintosh)

4-pin type

1394

 

1394 cable (optional)

•When controlling this camera from a non-linear editor, cancel the thumbnail screen on the camera. (Page 66)

•No guarantees are given for images and audio signals which are output simultaneously from the camera- recorder while data is being transferred from a computer to the camera-recorder.

When connecting the unit to an Apple Macintosh computer

•Connect the 1394 cable after turning on the power of the Apple Macintosh computer. Otherwise, the unit may not be mounted.

•The unit may not be recognized after the Apple Macintosh computer has been placed in the hibernation state by its power-saving setting. In this case, disconnect the 1394 cable and then re-connect it.

If the unit is not mounted properly on an Apple Macintosh computer

• When the P2 card access lamp flashes orange

1. Select [Applications] [Utilities] and start up [Disc Utility].

2. Select a grayed-out volume among volumes of the X.X GB Panasonic disc, and click “Mount.”

•When the P2 card access lamp is off

Eject the P2 card, and insert it again. If the unit is still not mounted, disconnect the 1394 cable and then re-connect it.

Editing

Hard disk drive (data copying)

Hard disk drive

4-pin type

1394

1394 cable (optional)

77