Using SD memory cards

TAPE

 

 

 

 

You can use SD memory cards to save and load SCENE files and USER files. (Page 56)

Installing and removing the SD

memory card

Installation

1Open the cover, and insert the card while making sure it is oriented in the proper direction.

Access lamp

2Close the cover.

Removal

1Open the cover, and check that the access lamp is not lit.

2Press the card further into the unit, grasp the card, and then remove.

3Close the cover.

Formatting SD memory card

1Switch the MEDIA switch to “P2”.

2Set the POWER switch to ON. (Page 20)

3Press the mode button and set it to MCR mode (the MCR/VCR lamp lights).

4Press the MENU button.

5On the menu, select OPERATION, FORMAT and then SD CARD.

• Select EXIT to cancel the formatting.

6Select YES on the confirmation screen.

• The selected SD memory card is formatted.

You can also format from the SD CARD FORMAT option on the CARD FUNCTIONS screen. (Page 114)

Cautions in using SD memory cards

•SD memory cards used with the AG-HVX200 should conform to SD standards. Be sure to format cards using the AG-HVX200.

To format SD memory cards using a personal computer, download the dedicated software from the support site.

SD memory cards with the following capacity (8MB - 1GB) can be used for the AG-HVX200:

8 MB

16 MB

32 MB

64 MB

128 MB

256 MB

512 MB

1 GB

For the latest information not available in the Operating Instructions, visit the P2 Support Desk at the following Web sites.

https://eww.pavc.panasonic.co.jp/pro-av/

•SD memory cards must not be used or stored in an environment where they may be

Exposed to high temperatures/humidities; Exposed to water droplets; or Electrically charged.

•Be sure always close the cover when using an SD memory card.

•You cannot use the SD memory card in the TAPE mode.

32