Panasonic AG-HVX200P Basic playback operations (P2 card)

Basic playback operations (P2 card)					P2
2				1 Before turning the POWER switch to ON
2				Set the MEDIA switch to the P2 position.
				2 Turn the POWER switch to ON.
Lock release				While pressing the lock release, turn the
Lock release				POWER switch to ON.
				POWER switch to ON.
				3 Press the mode button so the MCR lamp
				turns on.
				The camera is now in the MCR mode.
3	CAMERA			• Each time you press the button, the mode
3				• Each time you press the button, the mode
			1	changes as below.
	MCR	VCR	1	MCR CAMERA
				MCR CAMERA
	PC	DUB		P2 TAPE
				P2 TAPE
				When you press the mode button while
				MCR is selected, the unit enters the PC (PC
				connection) mode. (Page 82)

For details on playing back clips using thumbnails, see page 64.

Operations using the OPERATION button

Play ()

When this button is pressed in stop mode, playback will start from the ﬁrst clip selected.

During playback, the unit enters the variable speed search mode and starts 1x playback. (Page 73)

Fast-forward ()

When this button is pressed during playback, the clips are advanced from a point in the clip already selected (at four times normal speed). When the thumbnail screen is cancelled, you can also perform this operation while the camera is stopped.

When this button is held down, the playback speed becomes faster (32x speed).

When pressed during a pause, playback advances one clip.

Rewind ()

When this button is pressed during playback, the clips are rewound from a point in the clip already selected (at four times normal speed). When the thumbnail screen is cancelled, you can also perform this operation while the camera is stopped.When this button is held down, the playback speed becomes faster (32x speed).

When pressed during a pause, playback goes back one clip.

Stop ()