Nonlinear editing with P2 card (PC mode)

P2

 

 

 

 

You can edit the video data on P2 cards nonlinearly by connecting the unit to a computer used for editing by means of a USB cable (Windows) or 1394 cable (Apple Macintosh). (Connections : Page 77)

The following conditions must be met if the USB cable is to be used to make the connection.

•Your computer must run Windows 2000 or Windows XP.

•USB dedicated driver (provided on the CD-ROM supplied) must be installed in your computer.

•Your computer must support USB2.0 (High Speed, Mass Storage Class).

(USB 1.1 is not supported.)

•Only one computer can be connected.

•No operations can be performed if a hub or other unit is connected between the unit and your computer.

Do not use a USB cable longer than 3 meters. Otherwise, malfunctions may occur.

•Operation is not guaranteed in Macintosh operating systems.

The following conditions must be met if the 1394 cable is to be used to make the connection.

•Your computer must run Apple MacOSX 10.3 or later.

•Your computer must support 1394.a (SBP2 protocol).

•Operation is not guaranteed in Windows operating systems.

•Insert the P2 card into the unit, and set the MEDIA switch to the P2 position. (Page 25)

1Set the unit’s POWER switch to ON.

2Select PC MODE on the setting menu OTHER FUNCTIONS screen, and press the (or ) button.

•For menu operations (Page 96)

•You can also use the menu buttons on the remote control. (Page 15)

3Select USB DEVICE or 1394 DEVICE using the and buttons, and press the button.

USB DEVICE

4Press the MENU button twice to release

menu mode.

MENU

82