Installing and removing the power supply

Installing and removing the battery

Installation

Insert the battery until it clicks into place.

Removal

1Set the POWER switch to OFF, and check that the mode lamp is off.

2Remove the battery while pressing the battery release button.

•Support the battery with your hand to ensure that it will not fall.

Preparation

Battery release

button

Mode lamp

Connecting and disconnecting the power cord

Installation

1Connect the DC cord to the AC adapter.

2Plug the AC power supply into the power outlet.

3Insert the DC cord’s battery connector until it clicks into place.

DC cord’s battery connector

Removal

1Set the POWER switch to OFF, and check that the mode lamp is off.

2Remove the DC cord’s battery connector while pressing the battery release button.

3Disconnect the AC power supply cord from the power outlet.

•You cannot charge the battery when supplying power to the camera-recorder from the AC adapter.

CAUTION:

•This unit can be operated at a voltage in the range of 100-240V AC. An AC plug adapter may be required for voltages other than 120 V AC. If a conversion plug is required, consult with your dealer as to which one is to be purchased.

•Disconnect the AC power supply cord from the power outlet when the unit is not going to be used.

17