TAPE

Analog input (Tape)

Video contents on S-VHS (VHS) cassettes can be copied to tape, and TV programs can be recorded.

•Set the MEDIA switch to the TAPE position. (Page 29)

1Connect this unit to a video deck or a television. (Page 79)

2Press the mode button on the unit to switch to the MCR/VCR mode.

CAMERA

MCR VCR

PC DUB

3Set the external device to playback.

4Press the two REC buttons simultaneously. On the remote control, while pressing the REC

button, press the PLAY button.

REC

COUNTER RESET

TITLE ZOOM

MULTI/

REC

A.DUB

+

P-IN-P

 

 

 

ÐVOL

/REW PLAY FF/

STILL ADV PAUSE STILL ADV

INDEX STOP INDEX

Camera or Remote control

•When you press these two buttons simultaneously in the playback pause status, the unit is set to recording standby status.

Each time you press the button, the status switches between recording and recording standby.

To stop the dubbing, press the button.

•Stop playback on the external unit.

•You cannot adjust the audio level.

•Analog signals cannot be input in the P2 mode.

Analog/digital (AD) conversion (VCR mode only) You can use this unit to convert analog to digital signals. In the setup menus, AV IN/OUT SETUP screen, set 1394 OUT to “ON”. (Page 111)

This enables you to output digital images, which were input as analog signals from an external unit, through this unit’s 1394 connector to another digital video unit.

Video deck, etc.

Analog signals

This camera-recorder

Digital signals

 

Other digital video unit

Editing

 

•Normally, set 1394 OUT to “OFF”. Images may be disrupted if you set it to “ON”.

•You can also use the S-video cable.

89