Audio dubbing

TAPE

 

 

 

 

Background music or narration can be added to the images you have recorded on the tape.

1Set the POWER switch to ON.

2In the setup menus, select an audio recording system in RECORDING SETUP screen, AUDIO REC.

• For menu operation (Page 96)

32K(12bit):

The sound is recorded using the 12-bit/32kHz (4-channel) system.

Use this mode when you want keep the sound that recorded while you were shooting even after audio dubbing has been performed.

48K(16bit):

The sound is recorded using the 16-bit/48kHz (high-quality stereo) system.

When audio dubbing is performed, the sound that was recorded while you are shooting will be erased.

3Start shooting.

4Press the mode button to switch to the VCR mode.

CAMERA

MCR VCR

PC DUB

5In the setup menus, select an audio recording system in the AV IN/OUT SETUP

screen, A. DUB INPUT.

•For menu operation (Page 96)

MIC:

6Find the scene you want to add and set the unit to the still mode.

7Press the AUDIO DUB button to establish the status ready for audio dubbing.

Press the A. DUB button on the remote control unit.

• “A.DUB ” appears.

8Press the button, input the sound and start audio dubbing.

When the button is pressed again, the pause mode is established.

To resume audio dubbing, repeat steps 7 and 8.

•To end audio dubbing while it is underway, press the button.

AUDIO DUB button

Menu operation

controls

 

 

REC END SEARCH

 

AUDIO

 

DUB/

 

THUMBNAIL

 

SET

 

MENU

 

PAGE/

 

AUDIO MON/VAR

The sound of the built-in microphone or the external unit connected to INPUT 1/2 connector is recorded. (Select by CH1 SELECT switch and CH2 SELECT switch.)

A_IN:

The sound of audio component connected to AUDIO IN/OUT connector (pin jack) is recorded.

80