Panasonic AG-HVX200P manual 108

Setup menu list (continued)

RECORDING SETUP screen (continued)

		Item	Display					Description of settings
			mode
1394 UB REGEN			(MCR/	Selects the user information used when recording the signals from equipment
	P2	TAPE	VCR)	connected to the 1394 terminal.
				ON:
				Records using the user information of the signal input through the 1394
				terminal.
				OFF:
				Records using the user information set in UB MODE.
				• If you select ON here, this has priority over the setting in UB MODE.
				• The user information is recorded only when the signal contains the user
				information.
				• If there is no input to the 1394 terminal, the camera follows the UB MODE
				settings.
UB MODE			(Camera)	Set the content for user information.
	P2	TAPE	(MCR/	USER: Records the information of user.
			VCR)	TIME: Records the time at recording.
			(DUB)	DATE: Records the date at recording.
				TCG: Records the values of the time code generator.
				FRM. RATE: Records the frame rate information for frame conversion.
					a	b	c		d
				a:Checking information for user information
				b:Frame sequence No.
				• 0 to 4 are displayed in the 24P/24P (ADV) mode.
				• F is displayed in the 60i/30P mode.
				c:Frame rates
				• Frame rate (60/30/24)
				• I/P ID
				• Conversion data
				• Frame rate coefficient
				d:Recording management data
				• Frame update information
				• REC START/STOP information
UB PRESET			(Camera)	Sets the user information. Select USER in UB MODE.
	P2	TAPE	(MCR/
			VCR)
			(DUB)
1394 IN PRESET			(MCR/	Synchronizes the internal TCG value with the TC of 1394 input when you press
	P2	TAPE	VCR)	the TC SET button.
				ON: The synchronization mode is on.
				OFF: The synchronization mode is off.
										indicates the factory setting.

108