Screen displays (continued)
Errors
These are displayed when an error occurs in the unit, P2 card, tape, or other component. If the problem is not fixed by turning the power off and then on again, either replace the card or tape based on the error information, or contact your nearest service center.
AUTO OFF
When trouble occurs with tape running systems, AUTO OFF is displayed.
When AUTO OFF is displayed, the power supply of this device is automatically set to OFF.
CYLINDER LOCK
LOADING LOCK
UNLOADING LOCK
T REEL LOCK (Take up reel lock)
S REEL LOCK (Supply reel lock)
CANNOT PLAY
This is displayed when trouble has occurred during playback.
CARD ERR (1) (2) (1/2)
(Trouble has occurred in the P2 card found in the slot indicated by the number.)
CLIP ERROR (clip trouble) ERROR (other type of trouble)
SYSTEM ERROR
This is displayed when trouble has occurred in the system. Switch ON the power again.
P2 MICON ERROR (no P2 microcomputer response)
P2 CONTROL ERROR (trouble in P2 control) REC RAM OVERFLOW (recording RAM overflow)
TURN POWER OFF
This display appears when an abnormality occurs as a result of the card being pulled out while data is being accessed.
REC WARNING
This is displayed when trouble has occurred during recording. Carry out recording once again. If the warning persists, consult your dealer.
CARD ERR (1) (2) (1/2)
(Trouble has occurred in the P2 card found in the slot indicated by the number.)
•If the warning continues, turn off the power.
•If the warning appears even when recording is
carried out again, replace the card with another one.
ERROR (other type of trouble)
WARNING
When trouble occurs with camera systems, WARNING is displayed.
FOCUS LOCK (Abnormal focus operation) PSD NG (Abnormal vibration detected) GYRO NG (Abnormal Optical Image Stabilizer control)
1394
This is displayed when trouble has occurred in the 1394 connections or signals. (P2 mode only) 1394 INITIAL ERROR (connection error)
1394 INPUT ERROR (input error)
1394 INPUT ERROR (OTHER FORMAT) (wrong
input format)
94