Panasonic AJ-HD1200A operating instructions System, Indicates the factory setting

Setup menus

SYSTEM

	Item		Setting
				Description of settings
No.	Superimposed	No.	Superimposed
	display		display
12	SYS H (HD)	0000	–1100	For adjusting the system phase of the HD SDI output signals (in 13.5 ns
		:	:	increments).
		1100	0	–: The phase is advanced.
		:	:	+: The phase is delayed.
		2200	1100	<Note>
				The setting range is as follows:
				O –1320 to 0 to 1320 when 50i/25P, 25 (HD) or 25 (SD) is selected as the
				SYSTEM FREQ setting
				O –1375 to 0 to 1375 when 23/24 is selected as the SYSTEM FREQ setting
14	SYS SC (SD)	0000	–108	For adjusting the system phase of the VIDEO output and SD SDI output signals
		:	:	(total variable range of over ±180 degrees).
		0108	0	–: The phase is advanced.
		:	:	+: The phase is delayed.
		0216	108
15	VO SYS H (SD)	0000	–858	For adjusting the system phase of the VIDEO output signals (in 37 ns increments).
		:	:	–: The phase is advanced.
		0858	0	+: The phase is delayed.
		:	:	<Note>
		1716	858	The setting range is –864 to 0 to 864 when 50i/25P, 25 (HD) or 25 (SD) is selected
				as the menu item No.25 [SYSTEM FREQ] setting.
16	SD SYS H (SD)	0000	–858	For adjusting the system phase of the SD SDI output signals (in 37 ns increments).
		:	:	–: The phase is advanced.
		0858	0	+: The phase is delayed.
		:	:	<Note>
		1716	858	The setting range is –864 to 0 to 864 when 50i/25P, 25 (HD) or 25 (SD) is selected
				as the menu item No.25 [SYSTEM FREQ] setting.
18	SCH COAR (SD)	0000	0	For adjusting the SCH (sub-carrier to horizontal) phase of the VIDEO output
		0001	90	signals (4 positions in 90-degree increments).
		0002	180	The SC phase changes, and the H phase remains unchanged.
		0003	270
19	SCH FINE (SD)	0000	–32	For adjusting the SCH (sub-carrier to horizontal) phase of the VIDEO output
		:	:	signals (variable range of over ±45 degrees).
		0032	0	The SC phase changes, and the H phase remains unchanged.
		:	:	A range of ±180 degrees is covered by using this setting in combination with item
		0064	32	No.18 [SCH COAR(SD).
20	AV PHASE	0000	–100	For adjusting the phase of the AUDIO output signals in relation to the VIDEO
		:	:	output signals (in 20.8 µs increments).
		0100	0	–: The phase of the audio output signals is advanced in relation to the video output
		:	:	signals.
		0200	100	+: The phase of the audio output signals is delayed in relation to the video output
				signals.

“” indicates the factory setting.

31