To save the lens file into the built-in memory
|
| 7 Press the jog dial button again and turn it until the | ||
Select the file No. |
| |||
|
| character to be set is displayed. | ||
1 Using the menu operations, open the <LENS FILE> | ||||
When the button is turned, the character displayed is | ||||
switched in the following sequence: | ||||
screen from the FILE page. | Space: | | ||
2 Turn the jog dial button to move the arrow (cursor) to the | ||||
Ð |
| |||
Alphabetical characters: | A to Z | |||
FILE NO. item. | ||||
Ð |
| |||
3 Press the jog dial button and the file number will flash. |
| |||
Numerals: | 0 to 9 | |||
Ð |
| |||
Turn the jog dial button to select the file (1 to 64) to be | Symbols: | ', >, <, /, | ||
recorded. | ||||
8 Press the jog dial button to enter the character. | ||||
| ||||
| 9 Turn the jog dial button to move the arrow (cursor) to the | |||
| ||||
| next position (right), and repeat steps 7 and 8 to set the | |||
|
| |||
| characters (maximum of 12). | |||
| ||||
10 When the title has been input, turn the jog dial button to | ||||
| ||||
| ||||
| move the arrow (cursor) to the : position. | |||
|
| |||
|
|
| ||
|
|
| ||
| |
| ||
|
|
| ||
Recording for Settings and Adjustments
4 Press the jog dial button to enter the file number.
Give a title to the selected file.
5 Turn the jog dial button to move the arrow (cursor) to the TITLE item.
6 When the jog dial button is pressed, the arrow (cursor) moves to the title input area, and the input mode is established.
11 When the jog dial button is pressed, the arrow (cursor) returns to the TITLE item.
12 Turn the jog dial button to move the arrow (cursor) to the WRITE position.
Adjustments and Settings for Recording: Handling data 101