Panasonic AJ-HPX3700G Error Codes, Card Warning Code

Error Codes

The following error codes are displayed in the display window if an error occurs in the camera:

Confirm the type of warning and refer to the details in the [Warning Description Tables] (page 160) for countermeasures.

Code No.	Description		Type of warnings
E-11	Video initialization error	1. System Errors
E-27	Recording control error	1. System Errors
E-30	P2 card removal error	2.	Card removal error
E-34	LCD microcontroller error	1. System Errors
E-38	P2 streaming microcontroller error	1. System Errors
E-39	Abnormal initialization of the AVC-Intra codec	1. System Errors
E-3F	Microprocessor error in the camera control circuit	1.	System Errors
E-40	Image sequence error (in case of 24P, 30P and 25P), GENLOCK error	5.	Image Sequence Error (24P, 30P, 25P)
E-63	Something is wrong with the system control microprocessor.	1. System Errors
E-6F	Reference signal error.	1. System Errors
00:00:00:11	Recording error on a P2 card	6.	Recording Error/10. P2 Card Error

Card Warning Code

Code No.	Description	Recording	Indication in display
			window
	The directory structure on the P2 card is not	Operation continues. However, back up data
E-70	supported. ([DIR NG CARD (Slot No.)] is	on the P2 card as soon as possible, and	A warning code blinks once
	indicated on the viewfinder.)	format the card before using it again.
			every 2 seconds on the time
	The maximum number of overwrites on the P2	Operation continues. However, recording or
			code display section of the
E-71	card has been exceeded. ([RUN DOWN	playback may not operate correctly. It is	display window.
	CARD (Slot No.)] is indicated on the	recommended that you replace the P2 card
	viewfinder.)	with another one.

Inspections and Maintenance

Maintenance and Inspections: Warning System 163