Panasonic AJ-HPX3700G 60

AUDIO CH1: Function of switching the input signal source

for audio channel 1 assigned.

Pressing the button switches the input signal in the following order: FRONT W.L. REAR. Note that the AUDIO IN switch can also be used to change the input signal: later specification takes precedence.

AUDIO CH2: Function of switching the input signal source

for audio channel 2 assigned.

Pressing the button switches the input signal in the following order: FRONT W.L. REAR. Note that the AUDIO IN switch can also be used to change the input signal: later specification takes precedence.

REC SW: Function of the REC START button assigned.

RET SW: Function of the RET button at the lens assigned.

PRE REC: PRE RECORDING switch on/switch off function assigned.

SLOT SEL: Function of switching the target P2 card among multiple cards assigned. Not available when recording with the VFR function is “ON”.

PC MODE: The function to turn on or off the assigned USB device or USB host mode.

Switching between the USB device and USB host modes is set by selecting the PC MODE SELECT menu option in the <SYSTEM MODE> screen on the SYSTEM SETTING page.

TEXT MEMO:Function of switching the text memo function on/off is assigned. For more details about the text memo function, refer to [Text Memo Function] (page 47). This switching function can only be assigned to the TEXT MEMO button.

VF MARK: Function to select A, B or OFF as the marker for recording in the viewfinder. The A or B marker type is set using the <VF MARKER> screen of the VF page. This switching function can only be assigned to the MARKER SELECT button.

Notes

When the remote controller, AJ-RC10G (optional), is connected and I.OVR or C.TEMP is assigned to the user button on the side of the AJ-RC10G, operation of the jog dial button on the main unit is disabled.

The following functions are turned off when the power of the main unit is switched off.

I.OVR/S.BLK/B GAMMA/Y GET/DRS/ASSIST/C.TEMP/

FRATE/VF GAM

With regard to C.TEMP, note that the changes in color temperature will be stored.

60	Adjustments and Settings for Recording: Assigning Functions to User Buttons

Contents

Operating Instructions Memory Card Camera-Recorder Read this first PLEASE NOTE: What to remember when throwing memory cards away or transferring them to others EMC NOTICE FOR THE PURCHASER/USER OF THE APPARATUS 1.Applicable standards and operating environment 2.Pre-requisiteconditions to achieving compliance with the above standards 3.Performance level Contents Preparation Manipulating Clips with Thumbnails Connection with external device Maintenance and Inspections Menu Specifications General Features of Camera unit Features of Recorder/Player unit Text memos & Shot marks Front-mountedSound Level Control Mechanism Support for Built-inUnislot Wireless Receive Recording Time Recording Review Capability Features of the Input/Output unit Other features Dimensions drawing Color TV Standard Settings (Settings for frame frequency) System Configuration Parts and their Functions Power Supply and Accessory Mounting Section Audio (input) Function Section Audio (output) Function Section Shooting and Recording/Playback Functions Section 5.GAIN selector switch 6.OUTPUT/AUTO KNEE selector switch 7.WHITE BAL (white balance memory selector) switch 8.MODE CHECK button 9.MARKER SELECT button 13.TEXT MEMO button 16.MON OUT CHARACTER switch 14.SAVE ON/OFF switch 15.HD SDI A · B (output signal selector) switch 17.HD SDI A connector 19.MON OUT SEL (output signal selection) switch 20.REW (rewind) button and lamp 21.STOP button 22.FF (fast forward) button and lamp 23.PLAY/PAUSE button 32.SD memory card insertion slot 33.Busy (operation mode display) lamp Menu Operation Section Time Code Section Warning and Status Display Functions Display Window Functions LCD Monitor Viewfinder 15.Viewfinder left-rightposition anchoring ring 16.Viewfinder front-backposition anchoring lever Recording and Playback P2 Cards Page How to handle data recorded on P2 cards Basic Procedures Page Normal Recording Normal Recording and Native Recording PRE RECORDING function Variable Frame Rate (VFR) Recording Function Page Flow Effect Shooting Practical Use of Other VFR Recording Functions Page Loop Recording Interval Recording Page Recording Review Function Normal and Variable Speed Playback Text Memo Function Shot Mark Function Recording Setting and Operation Mode Multi Format Video system and Recording format Selecting a recording signal and method Recording formats and output connector signal formats Page Adjusting the White balance and Black Balance Adjusting the White Balance Page Setting Color Temperature Manually Adjusting the Black Balance Setting the Electronic Shutter Shutter Modes Setting the Shutter Mode and Speed Placing the Unit in SYNCHRO SCAN Mode Assigning Functions to User Buttons Page Selecting Audio Input Signals and Adjusting Recording Levels Selecting Audio Input Signals Adjusting Recording Levels Selecting Function for the FRONT AUDIO LEVEL Control CH3 and CH4 Recording Levels Setting Time Data Description of time data Recording time code and user bits Setting of the user bits b c e f Setting the Internal Clock’s Date and Time Setting the Time Code Externally Locking the Time Code Page Page Page Providing an ID to the Camera Setting UMID Information CTL Count Setting and Display Viewfinder Screen Status Displays Lamps in the Viewfinder Screen Mode Check Screen Displays (MODE CHECK button function) Y GET Area Display Selecting Viewfinder Display Information Viewfinder Status Indication Layout Page Page Page Page Page Page Page Page Display Modes and Setting Changes/adjustment Result Messages Setting the Marker Displays Marker Check Screen Displays (MARKER SELECT button function) Checking Return Video Signal in the Viewfinder Adjusting and setting the LCD monitor Selection of video output signals Settings of signals output from HD SDI A · B connector Settings of signals output from MON OUT connector Handling data Handling SD memory cards SD memory card operations Page Page Page How to Use the User Data How to Use Scene File Data Page Page Resetting Menu Option Settings to Defaults Lens file How to provide lens files To save the lens file into the built-inmemory To read the lens file from the builtin memory To write in and read out the lens file to/from the SD memory card Page Chromatic Aberration Compensation (CAC) Page Page Page Cinematograph Settings Page Page RGB 4:4:4 Output and P-10LOGSettings Preparation Power Supply Mounting the Battery and Setting the Battery Type CAUTION: Use of the external DC power supply Mounting the lens and Performing the Flange Back and White Shading Adjustments Page Page Preparing for Audio Input When Using the Front Microphone When Using a Wireless Receiver When Using Audio Devices Mounting the Camera on a Tripod Attaching the Shoulder Strap Attaching the Rain Cover Connection of the remote control unit (AJ-RC10G) Attaching the Front Audio Level Control Knob Connection of the DC OUT connector and External REC start/stop switch Thumbnail Manipulations Overview Thumbnail Screen 4.Recording mode 5.System mode 6.Duration 7.USB HOST mode indicator 8.Clip Number Selecting Thumbnails Playing back Clips Switching the Thumbnail Display Changing thumbnails Shot Mark Text Memo Adding a text memo Playing back a clip at the position where a text memo is recorded Deleting a text memo Using a text memo to break a clip and copy the necessary portion Deleting Clips Restoring Clips Copying Clips Setting of Clip Meta Data Page Page Setting of Proxy (optional) Formatting a P2 Card Formatting SD memory cards Setting the Thumbnail Display Mode Properties Clip Property Modification of recorded clip metadata P2 Card Status Display Write-protectMark P2 Card Status (remaining free space) P2 Card Status (used memory capacity) 3.P2 Card Remaining Capacity/Total Capacity 3.P2 Card used memory capacity/Total Capacity SD memory card Status Display Video Encoder Card Status Display (optional) Connection with external device Connection with external devices using the USB 2.0 port Connection with a PC in the USB DEVICE mode USB HOST mode Switching to the USB HOST mode Using the USB HOST mode 1.PARTITION 2.VENDOR 3.MODEL 4.SIZE 5.USED 8.MODEL 9.DATE/TIME 10.SERIAL 11.VERIFY 12.NAME Page Page Maintenance and Inspections Inspections Before Shooting Preparing for Inspections Inspecting the Camera Unit Inspecting the Memory Recording Functions Maintenance Cleaning Inside the Viewfinder Phenomenon Inherent to CCD Cameras Replacing the Backup Battery Connector Signals PUSH Caution Page Page Warning System Warning Description Tables Page Page Error Codes Card Warning Code Warning and Error Display for Thumbnail Operation and USB HOST MODE Page Menu Menu Configuration Page Setting Menu Options Selecting Options for USER MENU Menu Description Tables SYSTEM SETTING Page Page Page Page Page Page PAINT Page Page Page Page Page Page Page Page Page Page Page Page CAM OPERATION Page Page Page Page MAIN OPERATION Page Page Page Page Page FILE Page Page MAINTENANCE Page OPTION MENU Updating the firmware incorporated into the unit Specifications Digital Video System Audio Characteristics Page Software information for this product For business users in the European Union Information on Disposal in other Countries outside the European Union Note for the battery symbol (bottom two symbol examples):