3 Press the SET button.

The input window (soft keyboard) for modifying metadata is displayed. Use the keyboard to modify the metadata.

The keyboard operation is the same as [Checking and modifying read metadata] (page 138).

4 Press OK on the keyboard to write the modified metadata on the clip and return to the metadata window.

Notes

Deleting only the respective items of LOCATION (recording location data) in SHOOT is not possible. By setting ALTITUDE to empty, other LONGITUDE/ LATITUDE items are collectively deleted.

The metadata for a clip with the incomplete clip indicator cannot be modified. For the clips recorded on multiple P2 cards, modify the metadata while all P2 cards are inserted.

Any MEMO with 100 characters or more cannot be modified.

P2 Card Status Display

P2 Card Status Display Settings

Select PROPERTY  CARD STATUS from the thumbnail menu to set the desired indication mode (remaining free space or used memory capacity) for the P2 card status display.

1 Press the THUMBNAIL button.

The thumbnail screen appears on the LCD monitor.

2 Press the THUMBNAIL MENU button and select

PROPERTY  PROPERTY SETUP  P2 CARD CAP from the thumbnail menu.

The following screen appears. Select the P2 card status display settings from the P2 CARD CAP menu option.

REMAIN:

Show remaining free space on the P2 card as the P2 card status display. (Factory setting)

USED:

Show used memory capacity on the P2 card as the P2 card status display.

144 Manipulating Clips with Thumbnails: Properties