Information Item

 

 

 

 

 

Indication

Status

26.

Iris, F value

NC

 

Lens cable is not connected.

 

 

 

OPEN

 

Lens iris is at maximum.

 

 

F1.7 - F16

Lens iris value

 

 

CLOSE

Lens iris closed.

 

 

 

 

 

 

 

 

Note

 

 

 

 

 

 

 

 

These indications are provided when the lens is capable of indicating the iris

 

 

 

 

 

 

 

 

value. When the iris is being overridden, they blink.

27.

Zoom indication

Z00 - Z99

Zoom degree is indicated. This indication is not provided for a lens that does

 

 

 

 

 

 

 

 

not return the zoom position, even if the indication is set to on.

28.

INTERVAL REC/

 

 

 

 

 

 

Displayed before and after operation during INTERVAL REC mode.

 

 

 

 

 

 

 

PRE

 

 

 

 

 

(blink)

Displayed during INTERVAL REC operation.

 

 

 

 

 

 

 

RECORDING

 

 

 

 

 

(blink)

Displays the pause time before the next recording during INTERVAL REC.

 

 

 

 

 

 

 

indication/SD

 

 

 

 

 

 

 

 

 

 

h

m/ s

 

 

 

memory card

 

 

 

 

 

 

 

P-REC (blink)

Indicated while pre-recorded video and audio are being recorded on the P2

 

remaining free

 

space

 

 

 

 

 

 

card. If the user button is set to perform the PRE RECORDING function, either

 

 

 

 

 

 

 

 

“P-REC OFF” or the specified duration “1s - 8s” is displayed when the PRE

 

 

 

 

 

 

 

 

RECORDING mode is switched by pressing the user button.

 

 

 

 

 

 

 

 

If a video encoder card (AJ-YAX800G, optional) is attached, the remaining free

 

 

 

 

 

 

 

 

 

 

 

 

 

 

h

m

space on the SD Memory card will be displayed when the MODE CHECK

 

 

 

 

 

 

 

 

button is pressed during proxy recording.

 

 

END

 

“END” is displayed when there is no remaining free space.

29/43.

VF-GAMMA

 

 

 

 

 

 

This is only enabled when “FILM-REC” has been selected in the GAMMA

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MODE SEL menu option. Video shot in the FILM-REC gamma mode is

 

 

 

 

 

 

 

 

converted to high-contrast video and supplied to the viewfinder. GAMMA

 

 

 

 

 

 

 

 

MODE SEL can be selected from the screen <GAMMA> in the PAINT page.

30/44.

MON-GAMMA

M

 

This is only enabled when “FILM-REC” has been selected in the GAMMA

 

 

 

 

 

 

 

 

MODE SEL menu option. Video shot in the FILM-REC gamma mode is

 

 

 

 

 

 

 

 

converted to high-contrast video and supplied to the MON OUT output.

 

 

 

 

 

 

 

 

GAMMA MODE SEL can be selected from the screen <GAMMA> in the PAINT

 

 

 

 

 

 

 

 

page.

31.

F-REC DYNAMIC

200%

 

This indicates the dynamic range at FILM-REC.

 

LVL indication

300%

 

At other times, it indicates knee-slope.

 

 

400%

 

 

 

 

 

500%

 

 

 

 

 

600%

 

 

 

32.

F-REC BLACK

00% - 30%

This indicates the level of black stretch at FILM-REC.

 

STR LVL

 

 

 

 

 

 

At other times, it indicates knee-point.

 

indication

 

 

 

 

 

 

 

 

33.

MASTER

0.30 - 0.75

This indicates the master gamma level.

 

GAMMA

 

 

 

 

 

 

 

 

 

indication

 

 

 

 

 

 

 

 

34.

BLACK GAMMA

–8 - OFF - +8

This indicates the gamma curve setting for dark locations on the screen.

 

setting

 

 

 

 

 

 

 

 

Recording for Settings and Adjustments

Adjustments and Settings for Recording: Viewfinder Screen Status Displays

83